Buildings.Fluids.Chillers

Package Content

Name	Description
Carnot	Chiller with performance curve adjusted based on Carnot efficiency
Examples	Collection of models that illustrate model use and test models

Buildings.Fluids.Chillers.Carnot

Information

  COP_nominal = etaCar * COPCar
 
                             TEva
              = etaCar * -----------,
                          TCon-TEva

The chiller COP is computed as the product

  COP = etaCar * COPCar * etaPL,

On the Assumptions tag, the model can be parametrized to compute a transient or steady-state response. The transient response of the boiler is computed using a first order differential equation for the evaporator and condenser fluid volumes. The chiller outlet temperatures are equal to the temperatures of these lumped volumes.

Parameters

Type	Name	Default	Description
replaceable package Medium1		PartialMedium	Medium 1 in the component
replaceable package Medium2		PartialMedium	Medium 2 in the component
Nominal condition
MassFlowRate	m1_flow_nominal		Nominal mass flow rate [kg/s]
MassFlowRate	m2_flow_nominal	m1_flow_nominal	Nominal mass flow rate [kg/s]
Pressure	dp1_nominal		Pressure [Pa]
Pressure	dp2_nominal		Pressure [Pa]
Time	tau1	60	Time constant at nominal flow [s]
Time	tau2	60	Time constant at nominal flow [s]
Power	P_nominal		Nominal compressor power (at y=1) [W]
TemperatureDifference	dTEva_nominal	10	Temperature difference evaporator inlet-outlet [K]
TemperatureDifference	dTCon_nominal	10	Temperature difference condenser outlet-inlet [K]
Initialization
MassFlowRate	m1_flow.start	0	Mass flow rate from port_a1 to port_b1 (m1_flow > 0 is design flow direction) [kg/s]
Pressure	dp1.start	0	Pressure difference between port_a1 and port_b1 [Pa]
MassFlowRate	m2_flow.start	0	Mass flow rate from port_a2 to port_b2 (m2_flow > 0 is design flow direction) [kg/s]
Pressure	dp2.start	0	Pressure difference between port_a2 and port_b2 [Pa]
Efficiency
Boolean	use_eta_Carnot	true	Set to true to use Carnot efficiency
Real	etaCar		Carnot effectiveness (=COP/COP_Carnot)
Real	COP_nominal		Coefficient of performance
Temperature	TCon_nominal	303.15	Condenser temperature [K]
Temperature	TEva_nominal	278.15	Evaporator temperature [K]
Real	a[:]	{1}	Coefficients for efficiency curve (need p(a=a, y=1)=1)
Assumptions
Boolean	allowFlowReversal1	system.allowFlowReversal	= true to allow flow reversal in medium 1, false restricts to design direction (port_a -> port_b)
Boolean	allowFlowReversal2	system.allowFlowReversal	= true to allow flow reversal in medium 2, false restricts to design direction (port_a -> port_b)
Advanced
MassFlowRate	m1_flow_small	1E-4*m1_flow_nominal	Small mass flow rate for regularization of zero flow [kg/s]
MassFlowRate	m2_flow_small	1E-4*m2_flow_nominal	Small mass flow rate for regularization of zero flow [kg/s]
Diagnostics
Boolean	show_V_flow	true	= true, if volume flow rate at inflowing port is computed
Temperature dependence
EfficiencyInput	effInpEva	Buildings.Fluids.Types.Effic...	Temperatures of evaporator fluid used to compute Carnot efficiency
EfficiencyInput	effInpCon	Buildings.Fluids.Types.Effic...	Temperatures of condenser fluid used to compute Carnot efficiency
Initialization
AbsolutePressure	p_a1_start	system.p_start	Guess value for inlet pressure [Pa]
AbsolutePressure	p_b1_start	p_a1_start	Guess value for outlet pressure [Pa]
AbsolutePressure	p_a2_start	system.p_start	Guess value for inlet pressure [Pa]
AbsolutePressure	p_b2_start	p_a2_start	Guess value for outlet pressure [Pa]
Flow resistance
Medium 1
Boolean	from_dp1	true	= true, use m_flow = f(dp) else dp = f(m_flow)
Boolean	linearizeFlowResistance1	false	= true, use linear relation between m_flow and dp for any flow rate
Real	deltaM1	0.1	Fraction of nominal flow rate where flow transitions to laminar
Medium 2
Boolean	from_dp2	true	= true, use m_flow = f(dp) else dp = f(m_flow)
Boolean	linearizeFlowResistance2	false	= true, use linear relation between m_flow and dp for any flow rate
Real	deltaM2	0.1	Fraction of nominal flow rate where flow transitions to laminar

Connectors

Type	Name	Description
FluidPort_a	port_a1	Fluid connector a1 (positive design flow direction is from port_a1 to port_b1)
FluidPort_b	port_b1	Fluid connector b1 (positive design flow direction is from port_a1 to port_b1)
FluidPort_a	port_a2	Fluid connector a2 (positive design flow direction is from port_a2 to port_b2)
FluidPort_b	port_b2	Fluid connector b2 (positive design flow direction is from port_a2 to port_b2)
input RealInput	y	Part load ratio

Modelica definition

model Carnot 
  "Chiller with performance curve adjusted based on Carnot efficiency"
 extends Interfaces.PartialDynamicFourPortTransformer(
     redeclare Buildings.Fluids.MixingVolumes.MixingVolumeDryAir vol2(redeclare 
        package Medium = Medium2,
     nPorts=2, V=m2_flow_nominal*tau2/rho2_nominal,
     final use_HeatTransfer=true,
     redeclare model HeatTransfer = 
          Modelica_Fluid.Vessels.BaseClasses.HeatTransfer.IdealHeatTransfer (
             surfaceAreas={1})));

  parameter Buildings.Fluids.Types.EfficiencyInput effInpEva=
    Buildings.Fluids.Types.EfficiencyInput.volume 
    "Temperatures of evaporator fluid used to compute Carnot efficiency";
  parameter Buildings.Fluids.Types.EfficiencyInput effInpCon=
    Buildings.Fluids.Types.EfficiencyInput.port_a 
    "Temperatures of condenser fluid used to compute Carnot efficiency";
  parameter Modelica.SIunits.Power P_nominal 
    "Nominal compressor power (at y=1)";
  parameter Modelica.SIunits.TemperatureDifference dTEva_nominal = 10 
    "Temperature difference evaporator inlet-outlet";
  parameter Modelica.SIunits.TemperatureDifference dTCon_nominal = 10 
    "Temperature difference condenser outlet-inlet";
  // Efficiency
  parameter Boolean use_eta_Carnot = true 
    "Set to true to use Carnot efficiency";
  parameter Real etaCar(fixed=use_eta_Carnot) 
    "Carnot effectiveness (=COP/COP_Carnot)";
  parameter Real COP_nominal(fixed=not use_eta_Carnot) 
    "Coefficient of performance";
  parameter Modelica.SIunits.Temperature TCon_nominal = 303.15 
    "Condenser temperature";
  parameter Modelica.SIunits.Temperature TEva_nominal = 278.15 
    "Evaporator temperature";

  parameter Real a[:] = {1} 
    "Coefficients for efficiency curve (need p(a=a, y=1)=1)";

  Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow preHeaFloCon 
    "Prescribed heat flow rate";
  Modelica.Blocks.Sources.RealExpression QCon_flow_in(y=QCon_flow) 
    "Condenser heat flow rate";
  Modelica.Blocks.Sources.RealExpression QEva_flow_in(y=QEva_flow) 
    "Evaporator heat flow rate";
  Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow preHeaFloEva 
    "Prescribed heat flow rate";
  Modelica.Blocks.Interfaces.RealInput y(min=0, max=1) "Part load ratio";
  Real etaPL "Efficiency due to part load of compressor (etaPL(y=1)=1";
  Real COP(min=0) "Coefficient of performance";
  Real COPCar(min=0) "Carnot efficiency";
  Modelica.SIunits.HeatFlowRate QCon_flow "Condenser heat input";
  Modelica.SIunits.HeatFlowRate QEva_flow "Evaporator heat input";
  Modelica.SIunits.Power P "Compressor power";
  Modelica.SIunits.Temperature TCon 
    "Condenser temperature used to compute efficiency";
  Modelica.SIunits.Temperature TEva 
    "Evaporator temperature used to compute efficiency";
initial equation 
  assert(dTEva_nominal>0, "Parameter dTEva_nominal must be positive.");
  assert(dTCon_nominal>0, "Parameter dTCon_nominal must be positive.");
  if use_eta_Carnot then
    COP_nominal = etaCar * TEva_nominal/(TCon_nominal-TEva_nominal);
  else
    etaCar = COP_nominal / (TEva_nominal/(TCon_nominal-TEva_nominal));
  end if;
  assert(abs(Buildings.Utilities.Math.Functions.polynomial(
                                                     a=a, x=y)-1) < 0.01, "Efficiency curve is wrong. Need etaPL(y=1)=1.");
  assert(etaCar > 0.1, "Parameters lead to etaCar < 0.1. Check parameters.");
  assert(etaCar < 1,   "Parameters lead to etaCar > 1. Check parameters.");
equation 
  // Set temperatures that will be used to compute Carnot efficiency
  if effInpCon == Buildings.Fluids.Types.EfficiencyInput.volume then
    TCon = vol1.heatPort.T;
  elseif effInpCon == Buildings.Fluids.Types.EfficiencyInput.port_a then
    TCon = Medium1.temperature(sta_a1);
  elseif effInpCon == Buildings.Fluids.Types.EfficiencyInput.port_b then
    TCon = Medium1.temperature(sta_b1);
  else
    TCon = 0.5 * (Medium1.temperature(sta_a1)+Medium1.temperature(sta_b1));
  end if;

  if effInpEva == Buildings.Fluids.Types.EfficiencyInput.volume then
    TEva = vol2.heatPort.T;
  elseif effInpEva == Buildings.Fluids.Types.EfficiencyInput.port_a then
    TEva = Medium2.temperature(sta_a2);
  elseif effInpEva == Buildings.Fluids.Types.EfficiencyInput.port_b then
    TEva = Medium2.temperature(sta_b2);
  else
    TEva = 0.5 * (Medium2.temperature(sta_a2)+Medium2.temperature(sta_b2));
  end if;

  etaPL  = Buildings.Utilities.Math.Functions.polynomial(
                                                   a=a, x=y);
  P = y * P_nominal;
  COPCar = TEva / max(1, abs(TCon-TEva));
  COP = etaCar * COPCar * etaPL;
  -QEva_flow = COP * P;
  0 = P + QEva_flow + QCon_flow;

  connect(QCon_flow_in.y, preHeaFloCon.Q_flow);
  connect(QEva_flow_in.y, preHeaFloEva.Q_flow);
  connect(preHeaFloEva.port, vol1.heatPort);
  connect(preHeaFloCon.port, vol2.heatPort);
end Carnot;