Buildings.Fluid.Actuators.Examples

Collection of models that illustrate model use and test models

Information


This package contains examples for the use of models
that can be found in 
Buildings.Fluid.Actuators.


Extends from Buildings.BaseClasses.BaseIconExamples (Icon for Examples packages).

Package Content




NameDescription


Damper
 


ThreeWayValves
 


TwoWayValves
 


TwoWayValvesMotor
 


ValveParameterization
Model to test and illustrate different parameterization for valves


VAVBoxExponential
 


MixingBox
 


MixingBoxMinimumFlow
 








Buildings.Fluid.Actuators.Examples.Damper

Buildings.Fluid.Actuators.Examples.Damper

Modelica definition


model Damper

 package Medium = Buildings.Media.IdealGases.SimpleAir;

  Buildings.Fluid.Actuators.Dampers.Exponential res(
    A=1,
    redeclare package Medium = Medium,
    m_flow_nominal=1);
    Modelica.Blocks.Sources.Ramp yRam(
    duration=0.3,
    offset=0,
    startTime=0.2,
    height=1);
  Buildings.Fluid.Sources.Boundary_pT sou(             redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=1,
    T=293.15);
  Buildings.Fluid.Sources.Boundary_pT sin(             redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=1,
    T=293.15);
    Modelica.Blocks.Sources.Constant PAtm(k=101325);
  Buildings.Fluid.Actuators.Dampers.Exponential res1(
    A=1,
    redeclare package Medium = Medium,
    m_flow_nominal=1);
    Modelica.Blocks.Sources.Ramp yRam1(
    duration=0.3,
    height=1,
    offset=0);
    Modelica.Blocks.Sources.Ramp P1(
    duration=0.5,
    startTime=0.5,
    height=-10,
    offset=101330);
  Buildings.Fluid.Sources.Boundary_pT sou1(          redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=1,
    T=293.15);
  Buildings.Fluid.Sources.Boundary_pT sin1(          redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=1,
    T=293.15);
    Modelica.Blocks.Sources.Constant PAtm1(
                                          k=101325);
    Modelica.Blocks.Sources.Constant PAtm0(k=101335);
  inner Modelica.Fluid.System system;
equation 
  connect(yRam.y, res.y);
  connect(PAtm.y, sin.p_in);
  connect(yRam1.y, res1.y);
  connect(P1.y, sou1.p_in);
  connect(PAtm1.y, sin1.p_in);
  connect(PAtm0.y, sou.p_in);
  connect(sou.ports[1], res.port_a);
  connect(sin.ports[1], res.port_b);
  connect(sou1.ports[1], res1.port_a);
  connect(res1.port_b, sin1.ports[1]);
end Damper;







Buildings.Fluid.Actuators.Examples.ThreeWayValves

Buildings.Fluid.Actuators.Examples.ThreeWayValves

Information





Test model for three way valves. Note that the 
leakage flow rate has been set to a large value
and the rangeability to a small value
for better visualization of the valve characteristics.
To use common values, use the default values.






Modelica definition


model ThreeWayValves

 package Medium = Buildings.Media.ConstantPropertyLiquidWater 
    "Medium in the component";

  Buildings.Fluid.Actuators.Valves.ThreeWayLinear valLin(
    redeclare package Medium = Medium,
    l={0.05,0.05},
    m_flow_nominal=2) "Valve model, linear opening characteristics";
    Modelica.Blocks.Sources.Ramp y(
    height=1,
    duration=1,
    offset=0) "Control signal";
  Buildings.Fluid.Sources.Boundary_pT sou(             redeclare package Medium
      = Medium,
    nPorts=2,
    use_p_in=true,
    T=313.15);
  Buildings.Fluid.Sources.Boundary_pT sin(             redeclare package Medium
      = Medium,
    nPorts=2,
    use_p_in=true,
    T=313.15);
    Modelica.Blocks.Sources.Constant PSin(k=3E5);
    Modelica.Blocks.Sources.Constant PSou(k=306000);
  Actuators.Valves.ThreeWayEqualPercentageLinear valEquPerLin(
    l={0.05,0.05},
    redeclare package Medium = Medium,
    R=10,
    m_flow_nominal=2);
  Buildings.Fluid.Sources.Boundary_pT ret(
    redeclare package Medium = Medium,
    nPorts=2,
    use_p_in=true,
    T=303.15);
  inner Modelica.Fluid.System system;
equation 
  connect(y.y, valLin.y);
  connect(PSin.y, sin.p_in);
  connect(y.y, valEquPerLin.y);
  connect(sou.ports[1], valLin.port_1);
  connect(sou.ports[2], valEquPerLin.port_1);
  connect(valLin.port_2, sin.ports[1]);
  connect(valEquPerLin.port_2, sin.ports[2]);
  connect(PSou.y, ret.p_in);
  connect(ret.ports[1], valLin.port_3);
  connect(ret.ports[2], valEquPerLin.port_3);
  connect(PSou.y, sou.p_in);
end ThreeWayValves;







Buildings.Fluid.Actuators.Examples.TwoWayValves

Buildings.Fluid.Actuators.Examples.TwoWayValves

Information





Test model for two way valves. Note that the 
leakage flow rate has been set to a large value
and the rangeability to a small value
for better visualization of the valve characteristics.
To use common values, use the default values.






Modelica definition


model TwoWayValves

 package Medium = Buildings.Media.ConstantPropertyLiquidWater;

  Buildings.Fluid.Actuators.Valves.TwoWayLinear valLin(
    redeclare package Medium = Medium,
    l=0.05,
    m_flow_nominal=2) "Valve model, linear opening characteristics";
    Modelica.Blocks.Sources.Ramp y(
    height=1,
    duration=1,
    offset=0) "Control signal";
  Buildings.Fluid.Sources.Boundary_pT sou(             redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=3,
    T=293.15);
  Buildings.Fluid.Sources.Boundary_pT sin(             redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=3,
    T=293.15);
    Modelica.Blocks.Sources.Constant PSin(k=3E5);
    Modelica.Blocks.Sources.Constant PSou(k=306000);
  Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening valQui(
    redeclare package Medium = Medium,
    l=0.05,
    m_flow_nominal=2) "Valve model, quick opening characteristics";
  Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage valEqu(
    redeclare package Medium = Medium,
    l=0.05,
    R=10,
    delta0=0.1,
    m_flow_nominal=2) "Valve model, equal percentage opening characteristics";
  inner Modelica.Fluid.System system;
equation 
  connect(y.y, valLin.y);
  connect(PSin.y, sin.p_in);
  connect(PSou.y, sou.p_in);
  connect(y.y, valQui.y);
  connect(y.y, valEqu.y);
  connect(sou.ports[1], valLin.port_a);
  connect(valQui.port_a, sou.ports[2]);
  connect(valEqu.port_a, sou.ports[3]);
  connect(valLin.port_b, sin.ports[1]);
  connect(valQui.port_b, sin.ports[2]);
  connect(valEqu.port_b, sin.ports[3]);
end TwoWayValves;







Buildings.Fluid.Actuators.Examples.TwoWayValvesMotor

Buildings.Fluid.Actuators.Examples.TwoWayValvesMotor

Information





Test model for two way valves. Note that the 
leakage flow rate has been set to a large value
and the rangeability to a small value
for better visualization of the valve characteristics.
To use common values, use the default values.






Modelica definition


model TwoWayValvesMotor

 package Medium = Buildings.Media.ConstantPropertyLiquidWater;

  Buildings.Fluid.Actuators.Valves.TwoWayLinear valLin(
    redeclare package Medium = Medium,
    l=0.05,
    m_flow_nominal=2) "Valve model, linear opening characteristics";
  Buildings.Fluid.Sources.Boundary_pT sou(             redeclare package Medium
      = Medium,
    nPorts=3,
    use_p_in=true,
    T=293.15);
  Buildings.Fluid.Sources.Boundary_pT sin(             redeclare package Medium
      = Medium,
    nPorts=3,
    use_p_in=true,
    T=293.15);
    Modelica.Blocks.Sources.Constant PSin(k=3E5);
    Modelica.Blocks.Sources.Constant PSou(k=306000);
  Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening valQui(
    redeclare package Medium = Medium,
    l=0.05,
    m_flow_nominal=2) "Valve model, quick opening characteristics";
  Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage valEqu(
    redeclare package Medium = Medium,
    l=0.05,
    R=10,
    delta0=0.1,
    m_flow_nominal=2) "Valve model, equal percentage opening characteristics";
  Modelica.Blocks.Sources.TimeTable ySet(table=[0,0; 60,0; 60,1; 120,1; 180,0.5;
        240,0.5; 300,0; 360,0; 360,0.25; 420,0.25; 480,1; 540,1.5; 600,-0.25]) 
    "Set point for actuator";
  Actuators.Motors.IdealMotor mot(                 tOpe=60) "Motor model";
  inner Modelica.Fluid.System system;
equation 
  connect(PSin.y, sin.p_in);
  connect(PSou.y, sou.p_in);
  connect(ySet.y, mot.u);
  connect(mot.y, valEqu.y);
  connect(mot.y, valQui.y);
  connect(mot.y, valLin.y);
  connect(sou.ports[1], valLin.port_a);
  connect(sou.ports[2], valQui.port_a);
  connect(sou.ports[3], valEqu.port_a);
  connect(valLin.port_b, sin.ports[1]);
  connect(valQui.port_b, sin.ports[2]);
  connect(valEqu.port_b, sin.ports[3]);
end TwoWayValvesMotor;







Buildings.Fluid.Actuators.Examples.ValveParameterization

Model to test and illustrate different parameterization for valves

Buildings.Fluid.Actuators.Examples.ValveParameterization

Information





Test model for two way valves. This model tests the
different parameterization of the valve model.
The top and bottom two valves need to have the same flow rates.






Modelica definition


model ValveParameterization 
  "Model to test and illustrate different parameterization for valves"
  import Buildings;

 package Medium = Buildings.Media.ConstantPropertyLiquidWater;

  Buildings.Fluid.Actuators.Valves.TwoWayLinear valOPPoi(
    redeclare package Medium = Medium,
    m_flow_nominal=150/3600,
    CvData=Buildings.Fluid.Types.CvTypes.OpPoint,
    dp_nominal(displayUnit="kPa") = 4500) 
    "Valve model, linear opening characteristics";
    Modelica.Blocks.Sources.Constant y(k=1) "Control signal";
  Buildings.Fluid.Sources.Boundary_pT sou(             redeclare package Medium
      = Medium,
    use_p_in=true,
    nPorts=4,
    T=293.15);
  Buildings.Fluid.Sources.Boundary_pT sin(             redeclare package Medium
      = Medium,
    nPorts=4,
    use_p_in=false,
    p=300000,
    T=293.15);
    Modelica.Blocks.Sources.Ramp PSou(
    duration=1,
    offset=3E5,
    height=1E5);
  Valves.TwoWayLinear valKv(
    redeclare package Medium = Medium,
    CvData=Buildings.Fluid.Types.CvTypes.Kv,
    m_flow_nominal=150/3600,
    Kv=0.73,
    dp_nominal=450000) "Valve model, linear opening characteristics";
  inner Modelica.Fluid.System system;
  Valves.TwoWayLinear valCv(
    redeclare package Medium = Medium,
    m_flow_nominal=150/3600,
    CvData=Buildings.Fluid.Types.CvTypes.Cv,
    Cv=0.84,
    dp_nominal=450000) "Valve model, linear opening characteristics";
  Buildings.Fluid.Sensors.MassFlowRate senM_flowOpPoi(redeclare package Medium
      = Medium);
  Buildings.Fluid.Sensors.MassFlowRate senM_flowKv(redeclare package Medium =
        Medium);
  Buildings.Fluid.Sensors.MassFlowRate senM_flowCv(redeclare package Medium =
        Medium);
  Modelica.Fluid.Valves.ValveIncompressible valFlu(
    redeclare package Medium = Medium,
    dp_nominal(displayUnit="Pa") = 4500,
    m_flow_nominal=0.0416,
    CvData=Modelica.Fluid.Types.CvTypes.Cv,
    Cv=0.84) "Valve model, linear opening characteristics";
  Buildings.Fluid.Sensors.MassFlowRate senM_flowFlu(
                                                  redeclare package Medium =
        Medium);
  Buildings.Utilities.Diagnostics.AssertEquality equ1(threShold=0.01);
  Buildings.Utilities.Diagnostics.AssertEquality equ2(threShold=0.01);
equation 
  connect(y.y, valOPPoi.y);
  connect(PSou.y, sou.p_in);
  connect(y.y, valKv.y);
  connect(valKv.port_a, sou.ports[2]);
  connect(sou.ports[3], valCv.port_a);
  connect(y.y, valCv.y);
  connect(sou.ports[1], valOPPoi.port_a);
  connect(valOPPoi.port_b, senM_flowOpPoi.port_a);
  connect(valKv.port_b, senM_flowKv.port_a);
  connect(valCv.port_b, senM_flowCv.port_a);
  connect(senM_flowCv.port_b, sin.ports[3]);
  connect(senM_flowKv.port_b, sin.ports[2]);
  connect(senM_flowOpPoi.port_b, sin.ports[1]);
  connect(valFlu.port_b, senM_flowFlu.port_a);
  connect(sou.ports[4],valFlu. port_a);
  connect(senM_flowFlu.port_b, sin.ports[4]);
  connect(y.y,valFlu. opening);
  connect(senM_flowOpPoi.m_flow, equ1.u1);
  connect(senM_flowKv.m_flow, equ1.u2);
  connect(senM_flowCv.m_flow, equ2.u1);
  connect(senM_flowFlu.m_flow, equ2.u2);
end ValveParameterization;







Buildings.Fluid.Actuators.Examples.VAVBoxExponential

Buildings.Fluid.Actuators.Examples.VAVBoxExponential

Modelica definition


model VAVBoxExponential

 package Medium = Modelica.Media.Air.SimpleAir;

  Buildings.Fluid.Actuators.Dampers.Exponential dam(
         redeclare package Medium = Medium, A=1.8,
    m_flow_nominal=2);
    Modelica.Blocks.Sources.Ramp yRam(
    duration=0.4,
    height=-1,
    offset=1,
    startTime=0.6);
    Modelica.Blocks.Sources.Ramp P(
    duration=0.4,
    height=-10,
    offset=101330,
    startTime=0);
  Buildings.Fluid.Sources.Boundary_pT sou(             redeclare package Medium
      =        Medium, T=273.15 + 20,
    nPorts=2,
    use_p_in=true);
  Buildings.Fluid.Sources.Boundary_pT sin(             redeclare package Medium
      =        Medium, T=273.15 + 20,
    nPorts=2,
    use_p_in=true);
    Modelica.Blocks.Sources.Constant PAtm(k=101325);
  Buildings.Fluid.Actuators.Dampers.VAVBoxExponential vav(
    redeclare package Medium = Medium,
    dp_nominal=5,
    A=1.8,
    m_flow_nominal=2);
    Buildings.Fluid.FixedResistances.FixedResistanceDpM res(
    from_dp=true,
    m_flow_nominal=2,
    redeclare package Medium = Medium,
    dp_nominal=5 - 0.45*2^2/1.2/1.8^2/2);
  inner Modelica.Fluid.System system;
equation 
  connect(yRam.y,dam. y);
  connect(P.y, sou.p_in);
  connect(PAtm.y, sin.p_in);
  connect(yRam.y, vav.y);
  connect(res.port_b, dam.port_a);
  connect(sou.ports[1], res.port_a);
  connect(sou.ports[2], vav.port_a);
  connect(dam.port_b, sin.ports[1]);
  connect(sin.ports[2], vav.port_b);
end VAVBoxExponential;







Buildings.Fluid.Actuators.Examples.MixingBox

Buildings.Fluid.Actuators.Examples.MixingBox

Modelica definition


model MixingBox

 package Medium = Buildings.Media.GasesConstantDensity.SimpleAir 
    "Medium in the component";

  Dampers.MixingBox mixBox(
    AOut=0.7,
    AExh=1,
    ARec=1,
    mOut_flow_nominal=1,
    dpOut_nominal=20,
    mRec_flow_nominal=1,
    dpRec_nominal=20,
    mExh_flow_nominal=1,
    dpExh_nominal=20,
    redeclare package Medium = Medium) "mixing box";
    Buildings.Fluid.Sources.Boundary_pT bouIn(             redeclare package
      Medium = Medium, T=273.15 + 10,
    use_p_in=true,
    nPorts=2);
    Buildings.Fluid.Sources.Boundary_pT bouSup(             redeclare package
      Medium = Medium, T=273.15 + 26,
    use_p_in=true,
    nPorts=1);
    Buildings.Fluid.Sources.Boundary_pT bouRet(             redeclare package
      Medium = Medium, T=273.15 + 20,
    use_p_in=true,
    nPorts=1);
    Modelica.Blocks.Sources.Constant PAtm(k=101325);
    Modelica.Blocks.Sources.Ramp PSup(
    offset=101320,
    height=-10,
    startTime=0,
    duration=20);
    Modelica.Blocks.Sources.Ramp PRet(
    height=10,
    offset=101330,
    duration=20,
    startTime=20);
    Modelica.Blocks.Sources.Ramp yDam(
    startTime=40,
    height=1,
    offset=0,
    duration=10);

  inner Modelica.Fluid.System system;
equation 
  connect(yDam.y, mixBox.y);
  connect(bouIn.p_in, PAtm.y);
  connect(PRet.y, bouRet.p_in);
  connect(bouSup.p_in, PSup.y);
  connect(bouIn.ports[1], mixBox.port_Out);
  connect(bouIn.ports[2], mixBox.port_Exh);
  connect(bouSup.ports[1], mixBox.port_Sup);
  connect(bouRet.ports[1], mixBox.port_Ret);
end MixingBox;







Buildings.Fluid.Actuators.Examples.MixingBoxMinimumFlow

Buildings.Fluid.Actuators.Examples.MixingBoxMinimumFlow

Modelica definition


model MixingBoxMinimumFlow

 package Medium = Buildings.Media.GasesConstantDensity.SimpleAir 
    "Medium in the component";

  Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow mixBox(
    AOutMin=0.3,
    AOut=0.7,
    AExh=1,
    ARec=1,
    mOutMin_flow_nominal=0.3,
    dpOutMin_nominal=20,
    mOut_flow_nominal=1,
    dpOut_nominal=20,
    mRec_flow_nominal=1,
    dpRec_nominal=20,
    mExh_flow_nominal=1,
    dpExh_nominal=20,
    redeclare package Medium = Medium) "mixing box";
    Buildings.Fluid.Sources.Boundary_pT bouIn(             redeclare package
      Medium = Medium, T=273.15 + 10,
    use_p_in=true,
    nPorts=3);
    Buildings.Fluid.Sources.Boundary_pT bouSup(             redeclare package
      Medium = Medium, T=273.15 + 26,
    use_p_in=true,
    nPorts=1);
    Buildings.Fluid.Sources.Boundary_pT bouRet(             redeclare package
      Medium = Medium, T=273.15 + 20,
    use_p_in=true,
    nPorts=1);
    Modelica.Blocks.Sources.Constant PAtm(k=101325);
    Modelica.Blocks.Sources.Constant yDamMin(k=0.5);
    Modelica.Blocks.Sources.Ramp PSup(
    offset=101320,
    height=-10,
    startTime=0,
    duration=20);
    Modelica.Blocks.Sources.Ramp PRet(
    height=10,
    offset=101330,
    duration=20,
    startTime=20);
    Modelica.Blocks.Sources.Ramp yDam(
    duration=20,
    startTime=40,
    height=0.1,
    offset=0.45);

  inner Modelica.Fluid.System system;
equation 
  connect(yDamMin.y, mixBox.yOutMin);
  connect(yDam.y, mixBox.y);
  connect(bouIn.p_in, PAtm.y);
  connect(PRet.y, bouRet.p_in);
  connect(bouSup.p_in, PSup.y);
  connect(bouIn.ports[1], mixBox.port_OutMin);
  connect(bouIn.ports[2], mixBox.port_Out);
  connect(bouIn.ports[3], mixBox.port_Exh);
  connect(bouSup.ports[1], mixBox.port_Sup);
  connect(bouRet.ports[1], mixBox.port_Ret);
end MixingBoxMinimumFlow;





HTML-documentation generated by Dymola Fri Jul 30 18:05:57 2010.