Modelica.Electrical.Digital.Converters

Information

The Converter BooleanToLogic, LogicToBoolean, RealToLogic, and LogicTo Real components are not standard logic components. They were designed to easily convert from or to Boolean or Real valued signals. The LogicToX01, LogicToX01Z and LogicTo UX01 converters correspond to standard logic functions. They transform 9-valued logic to 3- or 4-valued logic.

Package Content

Name	Description
LogicToX01	Conversion to X01
LogicToX01Z	Conversion to X01Z
LogicToUX01	Conversion to UX01
BooleanToLogic	Boolean to Logic converter
LogicToBoolean	Logic to Boolean converter
RealToLogic	Real to Logic converter
LogicToReal	Logic to Real converter
LogicToXO1	This model will be removed in future Modelica versions, use 'LogicToX01' instead!
LogicToXO1Z	This model will be removed in future Modelica versions, use 'LogicToX01Z' instead!

Modelica.Electrical.Digital.Converters.LogicToX01

Information

Conversion of a nine valued digital input into a X01 digital output without any delay according to IEEE 1164 To_X01 function.

Conversion Table:

  input                  output
  'U' (coded by 1)       'X'  (coded by 2)
  'X' (coded by 2)       'X'  (coded by 2)
  '0' (coded by 3)       '0'  (coded by 3)
  '1' (coded by 4)       '1'  (coded by 4)
  'Z' (coded by 5)       'X'  (coded by 2)
  'W' (coded by 6)       'X'  (coded by 2)
  'L' (coded by 7)       '0'  (coded by 3)
  'H' (coded by 8)       '1'  (coded by 4)
  '-' (coded by 9)       'X'  (coded by 2)

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.LogicToX01Z

Information

Conversion of a nine valued digital input into a X01Z digital output without any delay according to IEEE 1164 To_X01Z function.

Conversion Table:

 input                  output
 'U' (coded by 1)       'X'  (coded by 2)
 'X' (coded by 2)       'X'  (coded by 2)
 '0' (coded by 3)       '0'  (coded by 3)
 '1' (coded by 4)       '1'  (coded by 4)
 'Z' (coded by 5)       'Z'  (coded by 5)
 'W' (coded by 6)       'X'  (coded by 2)
 'L' (coded by 7)       '0'  (coded by 3)
 'H' (coded by 8)       '1'  (coded by 4)
 '-' (coded by 9)       'X'  (coded by 2)

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.LogicToUX01

Information

Conversion of a nine valued digital input into a UX01 digital output without any delay according to IEEE 1164 To_UX01 function.

Conversion Table:

 input                  output
 'U' (coded by 1)       'U'  (coded by 1)
 'X' (coded by 2)       'X'  (coded by 2)
 '0' (coded by 3)       '0'  (coded by 3)
 '1' (coded by 4)       '1'  (coded by 4)
 'Z' (coded by 5)       'X'  (coded by 2)
 'W' (coded by 6)       'X'  (coded by 2)
 'L' (coded by 7)       '0'  (coded by 3)
 'H' (coded by 8)       '1'  (coded by 4)
 '-' (coded by 9)       'X'  (coded by 2)

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.BooleanToLogic

Information

Conversion of a Boolean input into a digital output without any delay according to:

 input      output
 true       '1'  (coded by 4)
 false      '0'  (coded by 3)

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.LogicToBoolean

Information

Conversion of a digital input into a Boolean output without any delay according to:

 input                 output
 'U'  (coded by 1)     false
 'X'  (coded by 2)     false
 '0'  (coded by 3)     false
 '1'  (coded by 4)     true
 'Z'  (coded by 5)     false
 'W'  (coded by 6)     false
 'L'  (coded by 7)     false
 'H'  (coded by 8)     true
 '-'  (coded by 9)     false

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.RealToLogic

Information

Conversion of a real input into a digital output without any delay according to:

                                 condition            output
      first check:               input greater upp    lupp
      second check:              input larger low     llow
                                 else                 lmid

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width
upper_limit	upper limit
lower_limit	lower limit
upper_value	output if input > upper_limit
lower_value	output if input < lower_limit
middle_value	output else

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.LogicToReal

Information

Conversion of a digital input into a Real output without any delay according to:

  input                 output
  'U'  (coded by 1)     val_U
  'X'  (coded by 2)     val_X
  '0'  (coded by 3)     val_0
  '1'  (coded by 4)     val_1
  'Z'  (coded by 5)     val_Z
  'W'  (coded by 6)     val_W
  'L'  (coded by 7)     val_L
  'H'  (coded by 8)     val_H
  '-'  (coded by 9)     val_m

The values val... are given by parameters.

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width
value_U	value for digital U (uninitialized)
value_X	value for digital X (Forcing Unknown)
value_0	value for digital 0 (Forcing 0)
value_1	value for digital 1 (Forcing 1)
value_Z	value for digital Z (High Impedance)
value_W	value for digital W (Weak Unknown)
value_L	value for digital L (Weak 0)
value_H	value for digital H (Weak 1)
value_m	value for digital m (Do not care)

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.LogicToXO1

Information

Obsoletion Note

This model will be removed in future versions of the Modelica Standard Library. Instead the model LogicToX01 shall be used.

Conversion of a nine valued digital input into a X01 digital output without any delay according to IEEE 1164 To_X01 function.

Conversion Table:

  input                  output
  'U' (coded by 1)       'X'  (coded by 2)
  'X' (coded by 2)       'X'  (coded by 2)
  '0' (coded by 3)       '0'  (coded by 3)
  '1' (coded by 4)       '1'  (coded by 4)
  'Z' (coded by 5)       'X'  (coded by 2)
  'W' (coded by 6)       'X'  (coded by 2)
  'L' (coded by 7)       '0'  (coded by 3)
  'H' (coded by 8)       '1'  (coded by 4)
  '-' (coded by 9)       'X'  (coded by 2)

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]

Modelica.Electrical.Digital.Converters.LogicToXO1Z

Information

Obsoletion Note

This model will be removed in future versions of the Modelica Standard Library. Instead the model LogicToX01Z shall be used.

Conversion of a nine valued digital input into a X01Z digital output without any delay according to IEEE 1164 To_X01Z function.

Conversion Table:

 input                  output
 'U' (coded by 1)       'X'  (coded by 2)
 'X' (coded by 2)       'X'  (coded by 2)
 '0' (coded by 3)       '0'  (coded by 3)
 '1' (coded by 4)       '1'  (coded by 4)
 'Z' (coded by 5)       'Z'  (coded by 5)
 'W' (coded by 6)       'X'  (coded by 2)
 'L' (coded by 7)       '0'  (coded by 3)
 'H' (coded by 8)       '1'  (coded by 4)
 '-' (coded by 9)       'X'  (coded by 2)

If the signal width is greater than 1 this conversion is done for each signal.

Parameters

Name	Description
n	signal width

Connectors

Name	Description
x[n]
y[n]