Buildings.Obsolete.Fluid.Movers.Data.Pumps.Wilo
Package with performance data for Wilo pumps
Information
This package contains performance data for Wilo pumps.
Extends from Modelica.Icons.Package (Icon for standard packages).
Package Content
| Name | Description |
|---|---|
 Stratos25slash1to4
|
Pump data for a Wilo Stratos 25/1-4 pump |
| Stratos32slash1to12
|
Pump data for a Wilo Stratos 32/1-12 pump |
Buildings.Obsolete.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to4
Pump data for a Wilo Stratos 25/1-4 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| VolumeFlowRate | V_flow_max | if havePressureCurve then (p... | Volume flow rate on the curve when pressure rise is zero [m3/s] |
| PressureDifference | dpMax | if havePressureCurve then (p... | Pressure rise on the curve when flow rate is zero [Pa] |
| Power computation | |||
| HydraulicEfficiencyMethod | etaHydMet | Buildings.Fluid.Movers.BaseC... | Efficiency computation method for the hydraulic efficiency etaHyd |
| MotorEfficiencyMethod | etaMotMet | if powerOrEfficiencyIsHydrau... | Efficiency computation method for the motor efficiency etaMot |
| Boolean | powerOrEfficiencyIsHydraulic | false | =true if hydraulic power or efficiency is provided, instead of total |
| efficiencyParameters | efficiency | Total or hydraulic efficiency vs. volumetric flow rate | |
| efficiencyParameters | motorEfficiency | Motor efficiency vs. volumetric flow rate | |
| efficiencyParameters_yMot | motorEfficiency_yMot | Motor efficiency vs. part load ratio yMot, where yMot = WHyd/WMot_nominal | |
| peak | peak | Volume flow rate, pressure rise, and efficiency (either total or hydraulic) at peak condition | |
| Power | WMot_nominal | if max(power.P) > Modelica.C... | Rated motor power [W] |
| Efficiency | etaMot_max | 0.7 | Maximum motor efficiency [1] |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 1800 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos25slash1to4 "Pump data for a Wilo Stratos 25/1-4 pump"
extends Generic(
speed_rpm_nominal=1800,
final powerOrEfficiencyIsHydraulic=false,
etaHydMet=Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate,
power(V_flow={5.55555555556e-07, 0.000402190923318, 0.00052269170579,
0.000643192488263, 0.000752738654147, 0.000866979655712,
0.000973395931142, 0.00108607198748, 0.00115962441315},
P={ 14.2085618951, 21.2596204596, 23.3573239437,
25.1349149442, 26.581943662, 27.9121571534,
28.8498841148, 29.4981726255, 29.7520982304}),
pressure(V_flow={5.55555555556e-07, 0.000402190923318, 0.00052269170579,
0.000643192488263, 0.000752738654147, 0.000866979655712,
0.000973395931142, 0.00108607198748, 0.00115962441315},
dp={ 17066.9518717, 16997.0053476, 16437.4331551,
15528.1283422, 14408.9839572, 13149.9465241,
11681.0695187, 9932.40641711, 8533.47593583}));
end Stratos25slash1to4;
Buildings.Obsolete.Fluid.Movers.Data.Pumps.Wilo.Stratos32slash1to12
Pump data for a Wilo Stratos 32/1-12 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| VolumeFlowRate | V_flow_max | if havePressureCurve then (p... | Volume flow rate on the curve when pressure rise is zero [m3/s] |
| PressureDifference | dpMax | if havePressureCurve then (p... | Pressure rise on the curve when flow rate is zero [Pa] |
| Power computation | |||
| HydraulicEfficiencyMethod | etaHydMet | Buildings.Fluid.Movers.BaseC... | Efficiency computation method for the hydraulic efficiency etaHyd |
| MotorEfficiencyMethod | etaMotMet | if powerOrEfficiencyIsHydrau... | Efficiency computation method for the motor efficiency etaMot |
| Boolean | powerOrEfficiencyIsHydraulic | false | =true if hydraulic power or efficiency is provided, instead of total |
| efficiencyParameters | efficiency | Total or hydraulic efficiency vs. volumetric flow rate | |
| efficiencyParameters | motorEfficiency | Motor efficiency vs. volumetric flow rate | |
| efficiencyParameters_yMot | motorEfficiency_yMot | Motor efficiency vs. part load ratio yMot, where yMot = WHyd/WMot_nominal | |
| peak | peak | Volume flow rate, pressure rise, and efficiency (either total or hydraulic) at peak condition | |
| Power | WMot_nominal | if max(power.P) > Modelica.C... | Rated motor power [W] |
| Efficiency | etaMot_max | 0.7 | Maximum motor efficiency [1] |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3580 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos32slash1to12 "Pump data for a Wilo Stratos 32/1-12 pump"
extends Generic(
speed_rpm_nominal=3580,
final powerOrEfficiencyIsHydraulic=false,
etaHydMet=Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate,
power(V_flow={2.11830535572e-05, 0.000167865707434, 0.000700939248601,
0.0012450039968, 0.00177258193445, 0.00227268185452,
0.00272332134293, 0.00312450039968, 0.00345423661071},
P={ 103.427852653, 110.225580543, 135.414121033,
162.955749719, 191.043411366, 216.051565678,
230.204882307, 236.346847436, 239.552825212}),
pressure(V_flow={2.11830535572e-05, 0.000167865707434, 0.000700939248601,
0.0012450039968, 0.00177258193445, 0.00227268185452,
0.00272332134293, 0.00312450039968, 0.00345423661071},
dp={ 59279.4925671, 59115.2927989, 59000.1476354,
57351.238791, 54446.2693068, 50284.7374612,
44865.6398104, 38328.4550274, 32066.9663984}));
end Stratos32slash1to12;