Buildings.Air.Systems.SingleZone.VAV.BaseClasses
Package with base classes for Buildings.Air.Systems.SingleZone.VAV
Information
This package contains base classes that are used to construct the models in Buildings.Air.Systems.SingleZone.VAV.
Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).
Package Content
| Name | Description |
|---|---|
 ControllerChillerDXHeatingEconomizer
|
Controller for single zone VAV system |
 ControllerEconomizer
|
Controller for economizer |
 ControllerHeatingFan
|
Controller for heating coil and fan signal |
 Validation
|
Buildings.Air.Systems.SingleZone.VAV.BaseClasses.ControllerChillerDXHeatingEconomizer
Controller for single zone VAV system
Information
This is a controller for the single-zone VAV system with an economizer, a heating coil and a cooling coil.
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Temperature | TSupChi_nominal | Design value for chiller leaving water temperature [K] | |
| Setpoints | |||
| Real | minAirFlo | Minimum airflow fraction of system [1] | |
| DimensionlessRatio | minOAFra | Minimum outdoor air fraction of system [1] | |
| Temperature | TSetSupAir | Cooling supply air temperature setpoint [K] | |
| Heating coil control | |||
| SimpleController | controllerTypeHea | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kHea | 0.1 | Gain for heating coil control signal [1/K] |
| Real | TiHea | 900 | Time constant of integrator block for heating coil control signal [s] |
| Real | TdHea | 0.1 | Time constant of derivative block for heating coil control signal [s] |
| Cooling coil control | |||
| SimpleController | controllerTypeCoo | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kCoo | 0.1 | Gain for cooling coil control signal [1/K] |
| Real | TiCoo | 900 | Time constant of integrator block for cooling coil control signal [s] |
| Real | TdCoo | 0.1 | Time constant of derivative block for cooling coil control signal [s] |
| Fan control | |||
| SimpleController | controllerTypeFan | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kFan | 0.1 | Gain for fan signal [1/K] |
| Real | TiFan | 900 | Time constant of integrator block for fan signal [s] |
| Real | TdFan | 0.1 | Time constant of derivative block for fan signal [s] |
| Economizer control | |||
| SimpleController | controllerTypeEco | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kEco | 0.1 | Gain for economizer control signal [1/K] |
| Real | TiEco | 300 | Time constant of integrator block for economizer control signal |
| Real | TdEco | 0.1 | Time constant of derivative block for economizer control signal [s] |
Connectors
| Type | Name | Description |
|---|---|---|
| input RealInput | TSetRooCoo | Zone cooling setpoint temperature [K] |
| input RealInput | TSetRooHea | Zone heating setpoint temperature [K] |
| input RealInput | TRoo | Zone temperature measurement [K] |
| input RealInput | TMix | Measured mixed air temperature [K] |
| input RealInput | TSup | Measured supply air temperature after the cooling coil [K] |
| input RealInput | TOut | Measured outside air temperature [K] |
| output RealOutput | yHea | Control signal for heating coil [1] |
| output RealOutput | yFan | Control signal for fan [1] |
| output RealOutput | yOutAirFra | Control signal for outside air fraction [1] |
| output RealOutput | yCooCoiVal | Control signal for cooling coil valve [1] |
| output RealOutput | TSetSupChi | Set point for chiller leaving water temperature [K] |
| output BooleanOutput | chiOn | On signal for chiller |
| input BooleanInput | uOcc | Current occupancy period, true if it is in occupant period |
Modelica definition
model ControllerChillerDXHeatingEconomizer
"Controller for single zone VAV system"
extends Modelica.Blocks.Icons.Block;
parameter Modelica.Units.SI.Temperature TSupChi_nominal
"Design value for chiller leaving water temperature";
parameter Real minAirFlo(
final min=0,
final max=1,
final unit="1")
"Minimum airflow fraction of system";
parameter Modelica.Units.SI.DimensionlessRatio minOAFra
"Minimum outdoor air fraction of system";
parameter Modelica.Units.SI.Temperature TSetSupAir
"Cooling supply air temperature setpoint";
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeHea=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kHea(
final unit="1/K")=0.1
"Gain for heating coil control signal";
parameter Real TiHea(
final unit="s",
final quantity="Time")=900
"Time constant of integrator block for heating coil control signal";
parameter Real TdHea(
final unit="s",
final quantity="Time")=0.1
"Time constant of derivative block for heating coil control signal";
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeCoo=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kCoo(
final unit="1/K")=0.1
"Gain for cooling coil control signal";
parameter Real TiCoo(
final unit="s")=900
"Time constant of integrator block for cooling coil control signal";
parameter Real TdCoo(
final unit="s")=0.1
"Time constant of derivative block for cooling coil control signal";
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeFan=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kFan(final unit="1/K")=0.1
"Gain for fan signal";
parameter Real TiFan(
final unit="s",
final quantity="Time")=900
"Time constant of integrator block for fan signal";
parameter Real TdFan(
final unit="s",
final quantity="Time")=0.1
"Time constant of derivative block for fan signal";
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeEco=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kEco(final unit="1/K")=0.1
"Gain for economizer control signal";
parameter Real TiEco=300
"Time constant of integrator block for economizer control signal";
parameter Real TdEco(
final unit="s",
final quantity="Time")=0.1
"Time constant of derivative block for economizer control signal";
Buildings.Controls.OBC.CDL.Interfaces.RealInput TSetRooCoo(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Zone cooling setpoint temperature";
Buildings.Controls.OBC.CDL.Interfaces.RealInput TSetRooHea(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Zone heating setpoint temperature";
Buildings.Controls.OBC.CDL.Interfaces.RealInput TRoo(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Zone temperature measurement";
Buildings.Controls.OBC.CDL.Interfaces.RealInput TMix(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Measured mixed air temperature";
Buildings.Controls.OBC.CDL.Interfaces.RealInput TSup(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Measured supply air temperature after the cooling coil";
Buildings.Controls.OBC.CDL.Interfaces.RealInput TOut(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Measured outside air temperature";
Buildings.Controls.OBC.CDL.Interfaces.RealOutput yHea(
final unit="1") "Control signal for heating coil";
Buildings.Controls.OBC.CDL.Interfaces.RealOutput yFan(
final unit="1") "Control signal for fan";
Buildings.Controls.OBC.CDL.Interfaces.RealOutput yOutAirFra(
final unit="1")
"Control signal for outside air fraction";
Buildings.Controls.OBC.CDL.Interfaces.RealOutput yCooCoiVal(
final unit="1")
"Control signal for cooling coil valve";
Buildings.Controls.OBC.CDL.Interfaces.RealOutput TSetSupChi(
final unit="K",
displayUnit="degC")
"Set point for chiller leaving water temperature";
Buildings.Controls.OBC.CDL.Interfaces.BooleanOutput chiOn
"On signal for chiller";
BaseClasses.ControllerHeatingFan conSup(
final controllerTypeHea=controllerTypeHea,
final kHea=kHea,
final TiHea=TiHea,
final TdHea=TdHea,
final controllerTypeFan=controllerTypeFan,
final kFan=kFan,
final TiFan=TiFan,
final TdFan=TdFan,
final minAirFlo = minAirFlo)
"Heating coil and fan controller";
BaseClasses.ControllerEconomizer conEco(
final controllerTypeEco=controllerTypeEco,
final kEco=kEco,
final TiEco=TiEco,
final TdEco=TdEco)
"Economizer control";
Buildings.Controls.Continuous.LimPID conCooVal(
final controllerType=controllerTypeCoo,
final k=kCoo,
final Ti=TiCoo,
final Td=TdCoo,
final yMax=1,
final yMin=0,
final reverseActing=false)
"Cooling coil valve controller";
Buildings.Controls.OBC.CDL.Reals.Switch swi
"Switch the outdoor air fraction to 0 when in unoccupied mode";
Buildings.Controls.OBC.CDL.Interfaces.BooleanInput uOcc
"Current occupancy period, true if it is in occupant period";
Buildings.Controls.OBC.CDL.Reals.Sources.Constant con(k=0)
"Zero outside air fraction";
Buildings.Controls.OBC.CDL.Reals.Switch swiFan "Switch fan on";
Buildings.Controls.OBC.CDL.Logical.MultiOr orFan(nin=3)
"Switch fan on if heating, cooling, or occupied";
Modelica.Blocks.Logical.And and1 "Logical and";
Buildings.Controls.OBC.CDL.Reals.Greater chiOnTRoo(h=1)
"Chiller on signal based on room temperature";
Controls.OBC.CDL.Reals.Greater heaOnTRoo(h=0.5)
"Heater on signal based on room temperature";
protected
Modelica.Blocks.Sources.Constant TSetSupChiConst(
final k=TSupChi_nominal)
"Set point for chiller temperature";
Modelica.Blocks.Sources.Constant conMinOAFra(
final k=minOAFra)
"Minimum outside air fraction";
Modelica.Blocks.Sources.Constant TSetSupAirConst(
final k=TSetSupAir)
"Set point for supply air temperature";
equation
connect(TSetSupAirConst.y,conCooVal. u_s);
connect(conSup.TRoo, TRoo);
connect(conEco.TRet, TRoo);
connect(conSup.yHea, yHea);
connect(conEco.yOutAirFra, yOutAirFra);
connect(conCooVal.y, yCooCoiVal);
connect(TSetSupChiConst.y, TSetSupChi);
connect(conCooVal.u_m, TSup);
connect(conMinOAFra.y, swi.u1);
connect(uOcc, swi.u2);
connect(swi.y, conEco.minOAFra);
connect(con.y, swi.u3);
connect(con.y, swiFan.u3);
connect(conSup.yFan, swiFan.u1);
connect(swiFan.y, yFan);
connect(swiFan.u2, orFan.y);
connect(conEco.TMixSet, conCooVal.u_s);
connect(and1.y, chiOn);
connect(conEco.yCoiSta, and1.u1);
connect(uOcc, orFan.u[1]);
connect(TMix, conEco.TMix);
connect(TOut, conEco.TOut);
connect(TRoo, chiOnTRoo.u1);
connect(TSetRooCoo, chiOnTRoo.u2);
connect(TSetRooCoo, conSup.TSetRooCoo);
connect(TSetRooHea, conSup.TSetRooHea);
connect(chiOnTRoo.y, and1.u2);
connect(chiOnTRoo.y, conEco.cooSta);
connect(chiOnTRoo.y, orFan.u[2]);
connect(heaOnTRoo.y, orFan.u[3]);
connect(heaOnTRoo.u2, TRoo);
connect(TSetRooHea, heaOnTRoo.u1);
end ControllerChillerDXHeatingEconomizer;
Buildings.Air.Systems.SingleZone.VAV.BaseClasses.ControllerEconomizer
Controller for economizer
Information
Economizer controller.
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Economizer control signal | |||
| SimpleController | controllerTypeEco | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kEco | 0.1 | Gain for economizer control signal [1/K] |
| Real | TiEco | 900 | Time constant of integrator block for economizer control signal [s] |
| Real | TdEco | 0.1 | Time constant of derivative block for economizer control signal [s] |
Connectors
| Type | Name | Description |
|---|---|---|
| input RealInput | TMixSet | Mixed air setpoint temperature [K] |
| input RealInput | TMix | Measured mixed air temperature [K] |
| input RealInput | TOut | Measured outside air temperature [K] |
| input BooleanInput | cooSta | Cooling status |
| input RealInput | TRet | Return air temperature [K] |
| input RealInput | minOAFra | Minimum outside air fraction [1] |
| output RealOutput | yOutAirFra | Control signal for outside air fraction [1] |
| output BooleanOutput | yCoiSta | Cooling coil status |
Modelica definition
model ControllerEconomizer "Controller for economizer"
extends Modelica.Blocks.Icons.Block;
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeEco=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kEco(final unit="1/K")=0.1
"Gain for economizer control signal";
parameter Real TiEco(
final unit="s",
final quantity="Time")=900
"Time constant of integrator block for economizer control signal";
parameter Real TdEco(
final unit="s",
final quantity="Time")=0.1
"Time constant of derivative block for economizer control signal";
Modelica.Blocks.Interfaces.RealInput TMixSet(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Mixed air setpoint temperature";
Modelica.Blocks.Interfaces.RealInput TMix(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Measured mixed air temperature";
Modelica.Blocks.Interfaces.RealInput TOut(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Measured outside air temperature";
Modelica.Blocks.Interfaces.BooleanInput cooSta "Cooling status";
Modelica.Blocks.Interfaces.RealInput TRet(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Return air temperature";
Modelica.Blocks.Interfaces.RealInput minOAFra(
final min = 0,
final max = 1,
final unit="1")
"Minimum outside air fraction";
Modelica.Blocks.Interfaces.RealOutput yOutAirFra(
final unit="1")
"Control signal for outside air fraction";
Modelica.Blocks.Nonlinear.VariableLimiter Limiter(
final strict=true)
"Signal limiter";
Modelica.Blocks.Sources.Constant const(
final k=1)
"Constant output signal with value 1";
Modelica.Blocks.Logical.Switch switch1 "Switch to select control output";
Modelica.Blocks.MathBoolean.And and1(
final nu=3) "Logical and";
Controls.Continuous.LimPID con(
final controllerType=controllerTypeEco,
final k=kEco,
final Ti=TiEco,
final Td=TdEco,
final reverseActing=false,
final yMax=1,
final yMin=0)
"Controller";
Modelica.Blocks.Math.Feedback feedback "Control error";
Modelica.Blocks.Math.Feedback feedback1;
Controls.OBC.CDL.Reals.Hysteresis hysChiPla(
final uLow=0.95,
final uHigh=0.98)
"Hysteresis with delay to switch on cooling";
Modelica.Blocks.Logical.Or or1 "Saturated ecnomizer or no economizer";
Modelica.Blocks.Interfaces.BooleanOutput yCoiSta "Cooling coil status";
Modelica.Blocks.Logical.Not not1 "No economizer";
Controls.OBC.CDL.Reals.Hysteresis hysCooPot(
final uLow=0,
final uHigh=0.5)
"Hysteresis with delay to check for cooling potential of outside air";
Controls.OBC.CDL.Logical.TrueFalseHold truFalHolCooPot(
final trueHoldDuration=60*15)
"True/false hold for cooling potential";
Controls.OBC.CDL.Logical.TrueFalseHold truFalHolTMix(
final trueHoldDuration=60*15)
"True/false hold for mixing temperature";
Controls.OBC.CDL.Reals.Hysteresis hysTMix(
final uLow=-0.5,
final uHigh=0.5)
"Hysteresis with delay for mixed air temperature";
equation
connect(Limiter.limit2, minOAFra);
connect(const.y, Limiter.limit1);
connect(minOAFra, switch1.u3);
connect(switch1.y, Limiter.u);
connect(and1.y, switch1.u2);
connect(con.u_s, TMixSet);
connect(TMix, con.u_m);
connect(con.y, switch1.u1);
connect(TOut, feedback.u2);
connect(feedback.u1, TMix);
connect(Limiter.y, yOutAirFra);
connect(feedback1.u1, TRet);
connect(feedback1.u2,TOut);
connect(Limiter.y, hysChiPla.u);
connect(or1.y, yCoiSta);
connect(not1.y, or1.u2);
connect(and1.y, not1.u);
connect(hysChiPla.y, or1.u1);
connect(feedback.y, hysTMix.u);
connect(hysTMix.y, truFalHolTMix.u);
connect(feedback1.y, hysCooPot.u);
connect(hysCooPot.y, truFalHolCooPot.u);
connect(truFalHolCooPot.y, and1.u[1]);
connect(truFalHolTMix.y, and1.u[2]);
connect(cooSta, and1.u[3]);
end ControllerEconomizer;
Buildings.Air.Systems.SingleZone.VAV.BaseClasses.ControllerHeatingFan
Controller for heating coil and fan signal
Information
Controller for heating coil and fan speed.
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | minAirFlo | Minimum airflow fraction of system [1] | |
| Heating coil signal | |||
| SimpleController | controllerTypeHea | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kHea | 0.1 | Gain for heating coil control signal [1/K] |
| Real | TiHea | 900 | Time constant of integrator block for heating coil control signal [s] |
| Real | TdHea | 0.1 | Time constant of derivative block for heating coil control signal [s] |
| Fan signal | |||
| SimpleController | controllerTypeFan | Buildings.Controls.OBC.CDL.T... | Type of controller |
| Real | kFan | 0.1 | Gain for fan signal [1/K] |
| Real | TiFan | 900 | Time constant of integrator block for fan signal [s] |
| Real | TdFan | 0.1 | Time constant of derivative block for fan signal [s] |
Connectors
| Type | Name | Description |
|---|---|---|
| input RealInput | TSetRooCoo | Zone cooling setpoint [K] |
| input RealInput | TRoo | Zone temperature measurement [K] |
| input RealInput | TSetRooHea | Zone heating setpoint [K] |
| output RealOutput | yFan | Control signal for fan [1] |
| output RealOutput | yHea | Control signal for heating coil [1] |
Modelica definition
model ControllerHeatingFan "Controller for heating coil and fan signal"
extends Modelica.Blocks.Icons.Block;
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeHea=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kHea(final unit="1/K")=0.1
"Gain for heating coil control signal";
parameter Real TiHea(
final unit="s",
final quantity="Time")=900
"Time constant of integrator block for heating coil control signal";
parameter Real TdHea(
final unit="s",
final quantity="Time")=0.1
"Time constant of derivative block for heating coil control signal";
parameter Buildings.Controls.OBC.CDL.Types.SimpleController controllerTypeFan=
Buildings.Controls.OBC.CDL.Types.SimpleController.PI
"Type of controller";
parameter Real kFan(final unit="1/K")=0.1
"Gain for fan signal";
parameter Real TiFan(
final unit="s",
final quantity="Time")=900
"Time constant of integrator block for fan signal";
parameter Real TdFan(
final unit="s",
final quantity="Time")=0.1
"Time constant of derivative block for fan signal";
parameter Real minAirFlo(
final min=0,
final max=1,
final unit="1")
"Minimum airflow fraction of system";
Modelica.Blocks.Interfaces.RealInput TSetRooCoo(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Zone cooling setpoint";
Modelica.Blocks.Interfaces.RealInput TRoo(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Zone temperature measurement";
Modelica.Blocks.Interfaces.RealInput TSetRooHea(
final unit="K",
displayUnit="degC",
final quantity="ThermodynamicTemperature")
"Zone heating setpoint";
Modelica.Blocks.Interfaces.RealOutput yFan(
final unit="1")
"Control signal for fan";
Modelica.Blocks.Interfaces.RealOutput yHea(
final unit="1")
"Control signal for heating coil";
Controls.Continuous.LimPID conHeaCoi(
final controllerType=controllerTypeHea,
final k=kHea,
final Ti=TiHea,
final Td=TdHea)
"Controller for heating coil";
Controls.Continuous.LimPID conFan(
final controllerType=controllerTypeFan,
final k=kFan,
final Ti=TiFan,
final Td=TdFan,
final yMax=1,
final yMin=minAirFlo,
final reverseActing=false)
"Controller for fan";
equation
connect(TSetRooHea, conHeaCoi.u_s);
connect(TRoo, conHeaCoi.u_m);
connect(conHeaCoi.y, yHea);
connect(conFan.u_s, TSetRooCoo);
connect(TRoo, conFan.u_m);
connect(conFan.y, yFan);
end ControllerHeatingFan;