03410nas a2200409 4500008004100000245008500041210006900126260001200195520213600207653000902343653002502352653002202377653002002399653001902419653002302438653003302461653003902494653003202533653001302565653002102578100002202599700001902621700002202640700002102662700002002683700001702703700002302720700002202743700002102765700002002786700002302806700001902829700001502848700002802863700002002891856008902911 2017 eng d00aSmall and Medium Building Efficiency Toolkit and Community Demonstration Program0 aSmall and Medium Building Efficiency Toolkit and Community Demon c03/20173 a
Small commercial buildings in the United States consume 47 percent of all primary energy consumed in the building sector. Retrofitting small and medium commercial buildings may pose a steep challenge for owners, as many lack the expertise and resources to identify and evaluate cost-effective energy retrofit strategies. To address this problem, this project developed the Commercial Building Energy Saver (CBES), an energy retrofit analysis toolkit that calculates the energy use of a building, identifies and evaluates retrofit measures based on energy savings, energy cost savings, and payback. The CBES Toolkit includes a web app for end users and the CBES Application Programming Interface for integrating CBES with other energy software tools. The toolkit provides a rich feature set, including the following:
In a parallel effort the project team developed technologies to measure outdoor airflow rate; commercialization and use would avoid both excess energy use from over ventilation and poor indoor air quality resulting from under ventilation.
If CBES is adopted by California’s statewide small office and retail buildings, by 2030 the state can anticipate 1,587 gigawatt hours of electricity savings, 356 megawatts of non-coincident peak demand savings, 30.2 megatherms of natural gas savings, $227 million of energy-related cost savings, and reduction of emissions by 757,866 metric tons of carbon dioxide equivalent. In addition, consultant costs will be reduced in the retrofit analysis process.
CBES contributes to the energy savings retrofit field by enabling a straightforward and uncomplicated decision-making process for small and medium business owners and leveraging different levels of assessment to match user background, preference, and data availability.
10aCBES10acommercial buildings10aenergy efficiency10aenergy modeling10aenergy savings10aindoor air quality10aindoor environmental quality10aoutdoor air measurement technology10aoutdoor airflow intake rate10aretrofit10aventilation rate1 aPiette, Mary, Ann1 aHong, Tianzhen1 aFisk, William, J.1 aBourassa, Norman1 aChan, Wanyu, R.1 aChen, Yixing1 aCheung, H.Y., Iris1 aHotchi, Toshifumi1 aKloss, Margarita1 aLee, Sang, Hoon1 aPrice, Phillip, N.1 aSchetrit, Oren1 aSun, Kaiyu1 aTaylor-Lange, Sarah, C.1 aZhang, Rongpeng uhttps://simulationresearch.lbl.gov/publications/small-and-medium-building-efficiency03910nas a2200229 4500008004100000245013300041210006900174260006100243300001200304490000600316520299300322653002403315653004003339653007503379653003403454653001903488653003403507653001003541100001903551700002203570856008803592 2010 eng d00aAssessment of Energy Savings Potential from the Use of Demand Control Ventilation Systems in General Office Spaces in California0 aAssessment of Energy Savings Potential from the Use of Demand Co aBerkeleybLawrence Berkeley National Laboratoryc06/2010 a117-1240 v33 aDemand controlled ventilation (DCV) was evaluated for general office spaces in California. A medium size office building meeting the prescriptive requirements of the 2008 California building energy efficiency standards (CEC 2008) was assumed in the building energy simulations performed with the EnergyPlus program to calculate the DCV energy savings potential in five typical California climates. Three design occupancy densities and two minimum ventilation rates were used as model inputs to cover a broader range of design variations. The assumed values of minimum ventilation rates in offices without DCV, based on two different measurement methods, were 81 and 28 cfm per occupant. These rates are based on the co‐author's unpublished analyses of data from EPA's survey of 100 U.S. office buildings. These minimum ventilation rates exceed the 15 to 20 cfm per person required in most ventilation standards for offices. The cost effectiveness of applying DCV in general office spaces was estimated via a life cycle cost analyses that considered system costs and energy cost reductions.
The results of the energy modeling indicate that the energy savings potential of DCV is largest in the desert area of California (climate zone 14), followed by Mountains (climate zone 16), Central Valley (climate zone 12), North Coast (climate zone 3), and South Coast (climate zone 6).
The results of the life cycle cost analysis show DCV is cost effective for office spaces if the typical minimum ventilation rates without DCV is 81 cfm per person, except at the low design occupancy of 10 people per 1000 ft2 in climate zones 3 and 6. At the low design occupancy of 10 people per 1000 ft2, the greatest DCV life cycle cost savings is a net present value (NPV) of $0.52/ft2 in climate zone 14, followed by $0.32/ft2 in climate zone 16 and $0.19/ft2 in climate zone 12. At the medium design occupancy of 15 people per 1000 ft2, the DCV savings are higher with a NPV $0.93/ft2 in climate zone 14, followed by $0.55/ft2 in climate zone 16, $0.46/ft2 in climate zone 12, $0.30/ft2 in climate zone 3, $0.16/ft2 in climate zone 3. At the high design occupancy of 20 people per 1000 ft2, the DCV savings are even higher with a NPV $1.37/ft2 in climate zone 14, followed by $0.86/ft2 in climate zone 16, $0.84/ft2 in climate zone 3, $0.82/ft2 in climate zone 12, and $0.65/ft2 in climate zone 6.
DCV was not found to be cost effective if the typical minimum ventilation rate without DCV is 28 cfm per occupant, except at high design occupancy of 20 people per 1000 ft2 in climate zones 14 and 16.
Until the large uncertainties about the base case ventilation rates in offices without DCV are reduced, the case for requiring DCV in general office spaces will be a weak case.
10abuilding simulation10acalifornia building energy standard10aCommercial Building Ventilation and Indoor Environmental Quality Group10ademand controlled ventilation10aenergy savings10aindoor environment department10aother1 aHong, Tianzhen1 aFisk, William, J. uhttps://simulationresearch.lbl.gov/publications/assessment-energy-savings-potential