02298nas a2200277 4500008004100000022001300041245016000054210006900214260001600283300001600299490000800315520136500323653004401688653002401732653002301756653001801779653002201797653002301819100001201842700001701854700001501871700001901886700001301905700001501918856008701933 2019 eng d a0048969700aAssessment of occupant-behavior-based indoor air quality and its impacts on human exposure risk: A case study based on the wildfires in Northern California0 aAssessment of occupantbehaviorbased indoor air quality and its i cJan-10-2019 a1251 - 12610 v6863 a

The recent wildfires in California, U.S., have caused not only significant losses to human life and property, but also serious environmental and health issues. Ambient air pollution from combustion during the fires could increase indoor exposure risks to toxic gases and particles, further exacerbating respiratory conditions. This work aims at addressing existing knowledge gaps in understanding how indoor air quality is affected by outdoor air pollutants during wildfires—by taking into account occupant behaviors (e.g., movement, operation of windows and air-conditioning) which strongly influence building performance and occupant comfort. A novel modeling framework was developed to simulate the indoor exposure risks considering the impact of occupant behaviours by integrating building energy and occupant behaviour modeling with computational fluid dynamics simulation. Occupant behaviors were found to exert significant impacts on indoor air flow patterns and pollutant concentrations, based on which, certain behaviors are recommended during wildfires. Further, the actual respiratory injury level under such outdoor conditions was predicted. The modeling framework and the findings enable a deeper understanding of the actual health impacts of wildfires, as well as informing strategies for mitigating occupant health risk during wildfires

10acomputational fluid dynamics siumlation10ahuman exposure risk10aindoor air quality10aNAPA wildfire10aoccupant behavior10arespiratory injury1 aLuo, Na1 aWeng, Wenguo1 aXu, Xiaoyu1 aHong, Tianzhen1 aFu, Ming1 aSun, Kaiyu uhttps://simulationresearch.lbl.gov/publications/assessment-occupant-behavior-based01804nas a2200265 4500008004100000022001300041245010900054210006900163260001600232300001100248490000800259520098000267653001601247653002201263653002101285653002501306653002401331100001401355700001901369700001301388700001701401700001601418700001901434856008501453 2019 eng d a0360132300aCross-source sensing data fusion for building occupancy prediction with adaptive lasso feature filtering0 aCrosssource sensing data fusion for building occupancy predictio cJan-09-2019 a1062800 v1623 a

Fusing various sensing data sources can significantly improve the accuracy and reliability of building occupancy detection. Fusing environmental sensors and wireless network signals are seldom studied for its computational and technical complexity. This study aims to propose an integrated adaptive lasso model that is able to extract critical data features for environmental and Wi-Fi probe dual sensing sources. Through rapid feature extraction and process simplification, the proposed method aims to improve the computational efficiency of occupancy detecting models. To validate the proposed model, an onsite experiment was conducted to examine two occupancy data resolutions, (real-time and four-level occupancy resolutions). The results suggested that, among all twelve features, eight features are most relevant. The mean absolute error of the real-time occupancy can be reduced to 2.18 and F1_accuracy is about 84.36% for the four-level occupancy.

10adata fusion10aFeature selection10aMachine learning10aoccupancy prediction10aPhysics-based model1 aWang, Wei1 aHong, Tianzhen1 aXu, Ning1 aXu, Xiaodong1 aChen, Jiayu1 aShan, Xiaofang uhttps://simulationresearch.lbl.gov/publications/cross-source-sensing-data-fusion02259nas a2200265 4500008004100000022001300041245013000054210006900184260001200253300001400265490000800279520141300287653002901700653002101729653002701750653001901777653003601796100001401832700001901846700001701865700001601882700001501898700001301913856006701926 2019 eng d a0306261900aForecasting district-scale energy dynamics through integrating building network and long short-term memory learning algorithm0 aForecasting districtscale energy dynamics through integrating bu c04/2019 a217 - 2300 v2483 a

With the development of data-driven techniques, district-scale building energy prediction has attracted increasing attention in recent years for revealing energy use patterns and reduction potentials. However, data acquisition in large building groups is difficult and adjacent buildings also interact with each other. To reduce data cost and incorporate the inter-building impact with the data-driven building energy model, this study proposes a deep learning predictive approach that fuses the building network model with a long short-term memory learning model for district-scale building energy modeling. The building network was constructed based on correlations between the energy use intensity of buildings, which can significantly reduce the computational complexity of the deep learning models for energy dynamic prediction. Five typical building groups with energy use data from 2015 to 2018 on two institutional campuses were selected to perform the validation experiment with TensorFlow. Based on the prediction error assessments, the results suggest that for total building energy use intensity prediction, the proposed model can achieve a mean absolute percentage error of 6.66% and a root mean square error of 0.36 kWh/m2, compared to 12.05% and 0.63 kWh/m2 of the conventional artificial neural network model and to 11.06% and 0.89 kWh/m2 for the support vector regression model.

10aBuilding Energy Modeling10aBuilding network10aData-driven prediction10aDistrict-scale10aLong short-term memory networks1 aWang, Wei1 aHong, Tianzhen1 aXu, Xiaodong1 aChen, Jiayu1 aLiu, Ziang1 aXu, Ning uhttps://linkinghub.elsevier.com/retrieve/pii/S030626191930749402515nas a2200241 4500008004100000022001300041245010300054210006900157260001200226300001200238490000800250520174400258653003102002653002102033653003902054653002602093653002102119100001702140700001402157700001902171700001602190856006702206 2019 eng d a0378778800aIncorporating machine learning with building network analysis to predict multi-building energy use0 aIncorporating machine learning with building network analysis to c06/2019 a80 - 970 v1863 a

Predicting multi-building energy use at campus or city district scale has recently gained more attention; and more researchers have started to define reference buildings and study inter-impact between building groups. However, how to integrate the relationship to define reference buildings and predict multi-building energy use, using significantly less amount of building data and reducing complexity of prediction models, remains an open research question. To resolve this, this study proposed a novel method to predict multi-building energy use by integrating a social network analysis (SNA) with an Artificial Neural Network (ANN) technique. The SNA method was used to establish a building network (BN) by identifying reference buildings and determine correlations between reference buildings and non-reference buildings. The ANN technique was applied to learn correlations and historical building energy use, and then used to predict multi-building energy use. To validate the SNA-ANN method, 17 buildings in the Southeast University campus, located in Nanjing, China, were studied. These buildings have three years of actual monthly electricity use data and were grouped into four types: office, educational, laboratory, and residential. The results showed the integrated SNA-ANN method achieved average prediction accuracies of 90.67% for the office group, 90.79% for the educational group, 92.34% for the laboratory group, and 83.32% for the residential group. The results demonstrated the proposed SNA-ANN method achieved an accuracy of 90.28% for the predicted energy use for all building groups. Finally, this study provides insights into advancing the interdisciplinary research on multi-building energy use prediction.

10aArtificial neural networks10aBuilding network10acold winter and hot summer climate10aEnergy use prediction10aMachine learning1 aXu, Xiaodong1 aWang, Wei1 aHong, Tianzhen1 aChen, Jiayu uhttps://linkinghub.elsevier.com/retrieve/pii/S037877881831976501921nas a2200265 4500008004100000022001300041245007100054210006600125260001200191300001600203490000800219520115000227653002401377653000901401653001401410653002501424653004301449653002101492100001501513700001201528700001901540700001501559700001401574856006701588 2019 eng d a0306261900aA novel approach for selecting typical hot-year (THY) weather data0 anovel approach for selecting typical hotyear THY weather data c03/2019 a1634 - 16480 v2423 a

The global climate change has resulted in not only warmer climate conditions but also more frequent extreme weather events, such as heat waves. However, the impact of heat waves on the indoor environment has been investigated in a limited manner. In this research, the indoor thermal environment is analyzed using a building performance simulation tool for a typical residential building in multiple cities in China, over a time period of 60 years using actual measured weather data, in order to gain a better understanding of the effect of heat wave events. The simulation results were used to analyze the indoor environment during hot summers. A new kind of weather data referred to as the typical hot year was defined and selected based on the simulated indoor environment during heat waves. The typical hot-year weather data can be used to simulate the indoor environment during extreme heat events and for the evaluation of effective technologies and strategies to mitigate against the impact of heat waves on the energy demand of buildings and human health. The limitations of the current study and future work are also discussed.

10aActual weather data10adest10aHeat wave10aMultiyear simulation10aResidential indoor thermal environment10aTypical hot year1 aGuo, Siyue1 aYan, Da1 aHong, Tianzhen1 aXiao, Chan1 aCui, Ying uhttps://linkinghub.elsevier.com/retrieve/pii/S030626191930465902290nas a2200193 4500008004100000022001400041245012000055210006900175260001200244300001400256490000700270520148300277100001701760700001401777700001401791700001901805700001301824856025901837 2019 eng d a1996-359900aPerformance-driven optimization of urban open space configuration in the cold-winter and hot-summer region of China0 aPerformancedriven optimization of urban open space configuration c03/2019 a411 - 4240 v123 a

Urbanization has led to changes in urban morphology and climate, while urban open space has become an important ecological factor for evaluating the performance of urban development. This study presents an optimization approach using computational performance simulation. With a genetic algorithm using the Grasshopper tool, this study analyzed the layout and configuration of urban open space and its impact on the urban micro-climate under summer and winter conditions. The outdoor mean Universal Thermal Climate Index (UTCI) was applied as the performance indicator for evaluating the quality of the urban micro-climate. Two cases—one testbed and one real urban block in Nanjing, China—were used to validate the computer-aided simulation process. The optimization results in the testbed showed UTCI values varied from 36.5 to 37.3 °C in summer and from −4.9 to −1.9 °C in winter. In the case of the real urban block, optimization results show, for summer, although the average UTCI value increased by 0.6 °C, the average air velocity increased by 0.2 m/s; while in winter, the average UTCI value increased by 1.7 °C and the average air velocity decreased by 0.2 m/s. These results demonstrate that the proposed computer-aided optimization process can improve the thermal comfort conditions of open space in urban blocks. Finally, this study discusses strategies and guidelines for the layout design of urban open space to improve urban environment comfort.

1 aXu, Xiaodong1 aWu, Yifan1 aWang, Wei1 aHong, Tianzhen1 aXu, Ning uhttp://link.springer.com/10.1007/s12273-019-0510-zhttp://link.springer.com/content/pdf/10.1007/s12273-019-0510-z.pdfhttp://link.springer.com/content/pdf/10.1007/s12273-019-0510-z.pdfhttp://link.springer.com/article/10.1007/s12273-019-0510-z/fulltext.html01789nas a2200205 4500008004100000245013500041210006900176260001600245300000900261490000700270520100200277653012101279100001701400700001801417700001401435700001301449700001901462700001101481856009101492 2019 eng d00aRevealing Urban Morphology and Outdoor Comfort through Genetic Algorithm-Driven Urban Block Design in Dry and Hot Regions of China0 aRevealing Urban Morphology and Outdoor Comfort through Genetic A cJan-07-2019 a36830 v113 a

In areas with a dry and hot climate, factors such as strong solar radiation, high temperature, low humidity, dazzling light, and dust storms can tremendously reduce people’s thermal comfort. Therefore, researchers are paying more attention to outdoor thermal comfort in urban environments as part of urban design. This study proposed an automatic workflow to optimize urban spatial forms with the aim of improvement of outdoor thermal comfort conditions, characterized by the universal thermal climate index (UTCI). A city with a dry and hot climate—Kashgar, China—is further selected as an actual case study of an urban block and Rhino & Grasshopper is the platform used to conduct simulation and optimization process with the genetic algorithm. Results showed that in summer, the proposed method can reduce the averaged UTCI from 31.17 to 27.43 °C, a decrease of about 3.74 °C, and reduce mean radiation temperature (MRT) from 43.94 to 41.29 °C, a decrease of about 2.65 °C.

10adry and hot areas; outdoor thermal comfort; urban morphology; urban performance simulation; genetic algorithm-driven1 aXu, Xiaodong1 aYin, Chenhuan1 aWang, Wei1 aXu, Ning1 aHong, Tianzhen1 aLi, Qi uhttps://www.mdpi.com/2071-1050/11/13/3683https://www.mdpi.com/2071-1050/11/13/3683/pdf01861nas a2200241 4500008004100000245010500041210006900146260001200215300000900227490000700236520110600243653001701349653002101366653002701387653002201414653001101436100001701447700001601464700001401480700001901494700001701513856008901530 2018 eng d00aPerformance-Based Evaluation of Courtyard Design in China’s Cold-Winter Hot-Summer Climate Regions0 aPerformanceBased Evaluation of Courtyard Design in China s ColdW c10/2018 a39500 v103 a

Evaluates the performance of the traditional courtyard design of the Jiangnan Museum, located in Jiangsu Province. In the evaluation, the spatial layout of courtyards is adjusted, the aspect ratio is changed, and an ecological buffer space is created. To model and evaluate the performance of the courtyard design, this study applied the Computational fluid dynamics (CFD) software, Parabolic Hyperbolic Or Elliptic Numerical Integration Code Series (PHOENICS), for wind environment simulation, and the EnergyPlus-based software, DesignBuilder, for energy simulation. Results show that a good combination of courtyard layout and aspect ratio can improve the use of natural ventilation by increasing free cooling during hot summers and reducing cold wind in winters. The results also show that ecological buffer areas of a courtyard can reduce cooling loads in summer by approximately 19.6% and heating loads in winter by approximately 22.3%. The study provides insights into the optimal design of a courtyard to maximize its benefit in regulating the microclimate during both winter and summer.

10aaspect ratio10acourtyard design10aecological buffer area10aecological effect10alayout1 aXu, Xiaodong1 aLuo, Fenlan1 aWang, Wei1 aHong, Tianzhen1 aFu, Xiuzhang uhttp://www.mdpi.com/2071-1050/10/11/3950http://www.mdpi.com/2071-1050/10/11/3950/pdf02060nas a2200265 4500008004100000245011700041210006900158260001200227300001200239490000800251520123400259653002401493653002401517653001501541653002501556653001801581653001701599100001401616700001201630700001901642700001501661700001401676700001401690856009001704 2017 eng d00aComparison of typical year and multiyear building simulations using a 55-year actual weather data set from China0 aComparison of typical year and multiyear building simulations us c06/2017 a890-9040 v1953 a

Weather has significant impacts on the thermal environment and energy use in buildings. Thus, accurate weather data are crucial for building performance evaluations. Traditionally, typical year data inputs are used to represent long-term weather data. However, there is no guarantee that a single year represents the changing climate well. In this study, the long-term representation of a typical year was assessed by comparing it to a 55-year actual weather data set. To investigate the weather impact on building energy use, 559 simulation runs of a prototype office building were performed for 10 large cities covering all climate zones in China. The analysis results demonstrated that the weather data varied significantly from year to year. Hence, a typical year cannot reflect the variation range of weather fluctuations. Typical year simulations overestimated or underestimated the energy use and peak load in many cases. With the increase in computational power of personal computers, it is feasible and essential to adopt multiyear simulations for full assessments of long-term building performance, as this will improve decision-making by allowing for the full consideration of variations in building energy use.

10aActual weather data10abuilding simulation10aenergy use10aMultiyear simulation10aPeak load  10aTypical year1 aCui, Ying1 aYan, Da1 aHong, Tianzhen1 aXiao, Chan1 aLuo, Xuan1 aZhang, Qi uhttps://simulationresearch.lbl.gov/publications/comparison-typical-year-and-multiyear01615nas a2200193 4500008004100000245007900041210006900120520095300189653002001142653001901162653002201181653003401203653002501237100001401262700001901276700001501295700002101310856009001331 2017 eng d00aA Preliminary Investigation of Water Usage Behavior in Single-Family Homes0 aPreliminary Investigation of Water Usage Behavior in SingleFamil3 a

As regional drought conditions continue deteriorating around the world, residential water use has been brought into the built environment spotlight. Nevertheless, the understanding of water use behavior in residential buildings is still limited. This paper presents data analytics and results from monitoring data of daily water use (DWU) in 50 single-family homes in Texas, USA. The results show the typical frequency distribution curve of the DWU per household and indicate personal income, education level and energy use of appliances all have statistically significant effects on the DWU per capita. Analysis of the water-intensive use demonstrates the residents tend to use more water in post-vacation days. These results help generate awareness of water use behavior in homes. Ultimately, this research could support policy makers to establish a water use baseline and inform water conservation programs.

 

10adaily water use10aData Analytics10aoccupant behavior10aresidential water consumption10aWater usage behavior1 aXue, Peng1 aHong, Tianzhen1 aDong, Bing1 aMak, Cheuk, Ming uhttps://simulationresearch.lbl.gov/publications/preliminary-investigation-water-usage02234nas a2200313 4500008003900000245007900039210006900118260001200187300001200199490000700211520134300218653001401561653001501575653001801590653001501608653002401623653002901647653001501676653001301691100001701704700001901721700001301740700001401753700001301767700001501780700001501795700002201810856008801832 2014 d00aComparison of Building Energy Use Data Between the United States and China0 aComparison of Building Energy Use Data Between the United States c08/2014 a165-1750 v783 a

Buildings in the United States and China consumed 41% and 28% of the total primary energy in 2011, respectively. Good energy data are the cornerstone to understanding building energy performance and supporting research, design, operation, and policy making for low energy buildings. This paper presents initial outcomes from a joint research project under the U.S.–China Clean Energy Research Center for Building Energy Efficiency. The goal is to decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders. This paper first reviews and compares several popular existing building energy monitoring systems in both countries. Next a standard energy data model is presented. A detailed, measured building energy data comparison was conducted for a few office buildings in both countries. Finally issues of data collection, quality, sharing, and analysis methods are discussed. It was found that buildings in both countries performed very differently, had potential for deep energy retrofit, but that different efficiency measures should apply.

10abuildings10acomparison10adata analysis10adata model10aEnergy benchmarking10aenergy monitoring system10aenergy use10aretrofit1 aXia, Jianjun1 aHong, Tianzhen1 aShen, Qi1 aFeng, Wei1 aYang, Le1 aIm, Piljae1 aLu, Alison1 aBhandari, Mahabir uhttps://simulationresearch.lbl.gov/publications/comparison-building-energy-use-data05291nas a2200193 4500008003900000245004400039210004400083260001200127520474700139100001904886700001404905700001504919700001704934700001304951700001304964700001504977700002204992856008305014 2013 d00aBuilding Energy Monitoring and Analysis0 aBuilding Energy Monitoring and Analysis c06/20133 a

U.S. and China are the world's top two economics. Together they consumed one-third of the world's primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services.

Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change.

This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

Key research findings were summarized as follows:

The research outputs from the project can help better understand energy performance of buildings, improve building operations to reduce energy waste and increase efficiency, identify retrofit opportunities for existing buildings, and provide guideline to improve the design of new buildings. The standardized energy monitoring and analysis platform as well as the collected real building data can also be used for other CERC projects that need building energy measurements, and be further linked to building energy benchmarking and rating/labeling systems.

1 aHong, Tianzhen1 aFeng, Wei1 aLu, Alison1 aXia, Jianjun1 aYang, Le1 aShen, Qi1 aIm, Piljae1 aBhandari, Mahabir uhttps://simulationresearch.lbl.gov/publications/building-energy-monitoring-and00537nas a2200145 4500008004100000022001500041245012400056210006900180260001500249100002100264700001700285700001900302700002100321856004900342 2009 eng d aLBNL-2819E00aTechnical Assistance to Beichuan Reconstruction: Creating and Designing Low- to Zero-carbon Communities in New Beichuan0 aTechnical Assistance to Beichuan Reconstruction Creating and Des bLBNLc20091 aXu, Tengfang, T.1 aWang, Chuang1 aHong, Tianzhen1 aLevine, Mark, D. uhttp://www.escholarship.org/uc/item/0vv4m1gb01584nas a2200169 4500008004100000245014200041210006900183260001800252520098100270653001301251653002301264653002501287653001201312100001801324700001301342856005901355 2007 eng d00aThe Building Controls Virtual Test Bed – a Simulation Environment for Developing and Testing Control Algorithms, Strategies and Systems0 aBuilding Controls Virtual Test Bed a Simulation Environment for  aBejing, China3 a

The paper describes the design of a Building Controls Virtual Test Bed (BCVTB), a simulation environment for the development of control algorithms and strategies for the major energy systems in buildings, HVAC, lighting, active facades and on-site generation. The BCVTB is based on the whole building energy simulation program EnergyPlus and includes both the pure simulation and the hardware-in-the-loop methods of implementing the controls. For convenience and scalability, the design of the hardware-in-the-loop interface for supervisory controls uses BACnet rather than the analog interface used for local loop control. The paper concludes with a case study of the use of a prototype implementation of the BCVTB to precommission the building control system for the naturally-ventilated San Francisco Federal Building. A number of problems were found with the control program, demonstrating the value of the precommissioning and the effectiveness of the technique.

10acontrols10adevelopment system10ahardware-in-the-loop10atesting1 aHaves, Philip1 aXu, Peng uhttp://www.ibpsa.org/proceedings/BS2007/p748_final.pdf01795nas a2200181 4500008004100000050001500041245009300056210006900149260001200218300001200230490000800242520124800250100001801498700001701516700002001533700001301553856004701566 2007 eng d aLBNL-6097900aA Semi-automated Commissioning Tool for VAV Air Handling Units: Functional Test Analyzer0 aSemiautomated Commissioning Tool for VAV Air Handling Units Func c01/2007 a380-3910 v1133 a

A software tool that automates the analysis of functional tests for air-handling units is described. The tool compares the performance observed during manual tests with the performance predicted by simple models of the components under test that are configured using design information and catalog data. Significant differences between observed and expected performance indicate the presence of faults. Fault diagnosis is performed by analyzing the variation of these differences with operating point using expert rules and fuzzy inferencing.

The tool has a convenient user interface to facilitate manual entry of measurements made during a test. A graphical display compares the measured and expected performance, highlighting significant differences that indicate the presence of faults. The tool is designed to be used by commissioning providers conducting functional tests as part of either new building commissioning or retro-commissioning, as well as by building owners and operators conducting routine tests to check the performance of their HVAC systems. The paper describes the input data requirements of the tool, the software structure, the graphical interface, and summarizes the development and testing process used.

1 aHaves, Philip1 aKim, Moosung1 aNajafi, Massieh1 aXu, Peng uhttp://gaia.lbl.gov/btech/papers/60979.pdf00459nas a2200121 4500008004100000024001500041245008600056210006900142490000800211100001300219700001800232856008700250 2006 eng d aLBNL-5864900aCase Study of Demand Shifting with Thermal Mass in Two Large Commercial Buildings0 aCase Study of Demand Shifting with Thermal Mass in Two Large Com0 v1121 aXu, Peng1 aHaves, Philip uhttps://simulationresearch.lbl.gov/publications/case-study-demand-shifting-thermal00436nas a2200097 4500008004100000245009300041210006900134260003200203100001300235856009000248 2006 eng d00aEvaluation of Demand Shifting Strategies With Thermal Mass in Large Commercial Buildings0 aEvaluation of Demand Shifting Strategies With Thermal Mass in La aCambridge, MA, USAc08/20061 aXu, Peng uhttps://simulationresearch.lbl.gov/publications/evaluation-demand-shifting-strategies00853nas a2200133 4500008004100000245007200041210006900113260001500182520040600197100001300603700001800616700002000634856006500654 2006 eng d00aA Library of HVAC Component Models for use in Automated Diagnostics0 aLibrary of HVAC Component Models for use in Automated Diagnostic aBoston, MA3 a

The paper describes and documents a library of equipment reference models developed for automated fault detection and diagnosis of secondary HVAC system (air handling units and air distribution systems). The models are used to predict the performance that would be expected in the absence of faults. The paper includes a description of the use of automatic documentation methods in the library.

1 aXu, Peng1 aHaves, Philip1 aCurtil, Dimitri uhttp://www.ibpsa.us/pub/simbuild2006/papers/SB06_034_041.pdf02284nas a2200145 4500008004100000245009700041210006900138260002400207520175000231100001301981700001901994700001702013700001902030856008902049 2006 eng d00aMeasured energy performance of a US-China demonstration energy-efficient commercial building0 aMeasured energy performance of a USChina demonstration energyeff aDallas, TXc01/20073 a

In July 1998, the U.S. Department of Energy (USDOE) and China's Ministry of Science of Technology (MOST) signed a Statement of Work (SOW) to collaborate on the design and construction of an energyefficient demonstration office building and design center to be located in Beijing. The proposed 13,000 m2 (140,000 ft2) nine-story office building would use U.S. energy-efficient materials, space-conditioning systems, controls, and design principles that were judged to be widely replicable throughout China. The SOW stated that China would contribute the land and provide for the costs of the base building, while the U.S. would be responsible for the additional (or marginal) costs associated with the package of energy efficiency andrenewable energy improvements to the building. The project was finished and the building occupied in 2004.

Using DOE-2 to analyze the energy performance of the as-built building, the building obtained 44 out of 69 possible points according to the Leadership in Energy and Environmental Design (LEED) rating, including the full maximum of 10 points in the energy performance section. The building achieved a LEED Gold rating, the first such LEED-rated office building in China, and is 60% more efficient than ASHRAE 90.1-1999. The utility data from the first year's operation match well the analysis results, providing that adjustments are made for unexpected changes in occupancy and operations. Compared with similarly equipped office buildings in Beijing, this demonstration building uses 60% less energy per floor area. However, compared to conventional office buildings with less equipment and window air-conditioners, the building uses slightly more energy per floor area.

1 aXu, Peng1 aHuang, Yu, Joe1 aJin, Ruidong1 aYang, Guoxiong uhttps://simulationresearch.lbl.gov/publications/measured-energy-performance-us-china00495nas a2200133 4500008004100000024001500041245009500056210006900151490000800220100001300228700001800241700001700259856008500276 2005 eng d aLBNL-5580200aModel-Based Automated Functional Testing-Methodology and Application to Air Handling Units0 aModelBased Automated Functional TestingMethodology and Applicati0 v1111 aXu, Peng1 aHaves, Philip1 aKim, Moosung uhttps://simulationresearch.lbl.gov/publications/model-based-automated-functional02109nas a2200157 4500008004100000024001700041050001500058245005600073210005300129260002200182520161100204100001301815700001801828700001701846856008801863 2005 eng d aLBNL/PUB-933 aLBNL-5864800aA Semi-Automated Functional Test Data Analysis Tool0 aSemiAutomated Functional Test Data Analysis Tool aNew York City, NY3 a

The growing interest in commissioning is creating a demand that will increasingly be met by mechanical contractors and less experienced commissioning agents. They will need tools to help them perform commissioning effectively and efficiently. The widespread availability of standardized procedures, accessible in the field, will allow commissioning to be specified with greater certainty as to what will be delivered, enhancing the acceptance and credibility of commissioning. In response, a functional test data analysis tool is being developed to analyze the data collected during functional tests for air-handling units.

The functional test data analysis tool is designed to analyze test data, assess performance of the unit under test and identify the likely causes of the failure. The tool has a convenient user interface to facilitate manual entry of measurements made during a test. A graphical display shows the measured performance versus the expected performance, highlighting significant differences that indicate the unit is not able to pass the test. The tool is described as semi-automated because the measured data need to be entered manually, instead of being passed from the building control system automatically. However, the data analysis and visualization are fully automated. The tool is designed to be used by commissioning providers conducting functional tests as part of either new building commissioning or retro-commissioning, as well as building owners and operators interested in conducting routine tests periodically to check the performance of their HVAC systems.

1 aXu, Peng1 aHaves, Philip1 aKim, Moosung uhttps://simulationresearch.lbl.gov/publications/semi-automated-functional-test-data01965nas a2200145 4500008004100000050001500041245007800056210006900134260002500203520144600228100001301674700001801687700002401705856009001729 2005 eng d aLBNL-5580100aA Simulation-Based Testing and Training Environment for Building Controls0 aSimulationBased Testing and Training Environment for Building Co aBoulder, COc08/20043 a

A hybrid simulation environment for controls testing and training is described. A real-time simulation of a building and HVAC system is coupled to a real building control system using a hardware interface. A prototype has been constructed and tested in which the dynamic performance of both the HVAC equipment and the building envelope is simulated using SPARK (Simulation Problem Analysis and Research Kernel). A low cost hardware interface between the simulation and the real control system is implemented using plug-in analog-to-digital and digital-to-analog cards in a personal computer. The design and implementation of the hardware interface in SPARK are described. The development of a variant of this environment that uses a derivative of EnergyPlus to test the implementation of a natural ventilation control strategy in real control hardware is also described.

Various applications of the hybrid simulation environment are briefly described, including the development of control algorithms and strategies, control system product testing and the pre-commissioning of building control system installations. The application to the education and training of building operators and HVAC service technicians is discussed in more detail, including the development of a community college curriculum that includes the use of the hybrid simulation environment to teach both control system configuration and HVAC troubleshooting.

1 aXu, Peng1 aHaves, Philip1 aDeringer, Joseph, J uhttps://simulationresearch.lbl.gov/publications/simulation-based-testing-and-training02097nas a2200157 4500008003900000245009300039210006900132260003100201520151300232653003401745100001301779700001801792700002201810700002101832856008601853 2004 d00aPeak Demand Reduction from Pre-Cooling with Zone Temperature Reset in an Office Building0 aPeak Demand Reduction from PreCooling with Zone Temperature Rese aPacific Grove, CAc08/20043 a

The objective of this study was to demonstrate the potential for reducing peak-period electrical demand in moderate-weight commercial buildings by modifying the control of the HVAC system. An 80,000 ft2 office building with a medium-weight building structure and high window-to-wall ratio was used for a case study in which zone temperature set-points were adjusted prior to and during occupancy. HVAC performance data and zone temperatures were recorded using the building control system. Additional operative temperature sensors for selected zones and power meters for the chillers and the AHU fans were installed for the study. An energy performance baseline was constructed from data collected during normal operation. Two strategies for demand shifting using the building thermal mass were then programmed in the control system and implemented progressively over a period of one month. It was found that a simple demand limiting strategy performed well in this building. This strategy involved maintaining zone temperatures at the lower end of the comfort region during the occupied period up until 2 pm. Starting at 2 pm, the zone temperatures were allowed to float to the high end of the comfort region. With this strategy, the chiller power was reduced by 80-100% (1 - 2.3 W/ft2) during normal peak hours from 2 - 5 pm, without causing any thermal comfort complaints. The effects on the demand from 2 - 5 pm of the inclusion of pre-cooling prior to occupancy are unclear.

10ademand shifting (pre-cooling)1 aXu, Peng1 aHaves, Philip1 aPiette, Mary, Ann1 aBraun, James, E. uhttps://simulationresearch.lbl.gov/publications/peak-demand-reduction-pre-cooling01945nas a2200145 4500008004100000024001500041245007800056210006900134260001600203520144200219100001301661700001801674700002401692856008301716 2004 eng d aLBNL-5580100aA simulation-based testing and training environment for building controls0 asimulationbased testing and training environment for building co aBoulder, CO3 a

A hybrid simulation environment for controls testing and training is described. A real-time simulation of a building and HVAC system is coupled to a real building control system using a hardware interface. A prototype has been constructed and tested in which the dynamic performance of both the HVAC equipment and the building envelope is simulated using SPARK (Simulation Problem Analysis and Research Kernel). A low cost hardware interface between the simulation and the real control system is implemented using plug-in analog-to-digital and digital-to-analog cards in a personal computer. The design and implementation of the hardware interface in SPARK are described. The development of a variant of this environment that uses a derivative of EnergyPlus to test the implementation of a natural ventilation control strategy in real control hardware is also described. Various applications of the hybrid simulation environment are briefly described, including the development of control algorithms and strategies, control system product testing and the pre-commissioning of building control system installations. The application to the education and training of building operators and HVAC service technicians is discussed in more detail, including the development of a community college curriculum that includes the use of the hybrid simulation environment to teach both control system configuration and HVAC troubleshooting.

1 aXu, Peng1 aHaves, Philip1 aDeringer, Joseph, J uhttps://simulationresearch.lbl.gov/publications/simulation-based-testing-and-000431nas a2200121 4500008004100000050001500041245006000056210005700116100001300173700001700186700001800203856008800221 2003 eng d aLBNL-5351200aAn automated functional test and fault detection method0 aautomated functional test and fault detection method1 aXu, Peng1 aKim, Moosung1 aHaves, Philip uhttps://simulationresearch.lbl.gov/publications/automated-functional-test-and-fault00512nas a2200145 4500008004100000245007700041210006900118300001200187490000700199100001800206700002100224700001800245700001500263856008800278 2003 eng d00aComputer Measurement and Automation System for Gas-fired Heating Furnace0 aComputer Measurement and Automation System for Gasfired Heating  a374-3780 v351 aPang, Xiufeng1 aJiang, Yongcheng1 aMiao, Yan-shu1 aXiong, Jun uhttps://simulationresearch.lbl.gov/publications/computer-measurement-and-automation00408nas a2200109 4500008004100000050001500041245006200056210006200118100001300180700001800193856008700211 2003 eng d aLBNL-5350500aLibrary of component reference models for fault detection0 aLibrary of component reference models for fault detection1 aXu, Peng1 aHaves, Philip uhttps://simulationresearch.lbl.gov/publications/library-component-reference-models01390nas a2200133 4500008004100000024001700041245011000058210006900168260003900237520086100276100001301137700001801150856008801168 2002 eng d aLBNL - 5067800aField Testing of Component-Level Model-Based Fault Detection Methods for Mixing Boxes and VAV Fan Systems0 aField Testing of ComponentLevel ModelBased Fault Detection Metho aAsilomar, California, USAc08/20023 a

An automated fault detection and diagnosis tool for HVAC systems is being developed, based on an integrated, lifecycle, approach to commissioning and performance monitoring. The tool uses component-level HVAC equipment models implemented in the SPARK equation-based simulation environment. The models are configured using design information and component manufacturers' data and then fine-tuned to match the actual performance of the equipment by using data measured during functional tests of the sort using in commissioning. This paper presents the results of field tests of mixing box and VAV fan system models in an experimental facility and a commercial office building. The models were found to be capable of representing the performance of correctly operating mixing box and VAV fan systems and detecting several types of incorrect operation.

1 aXu, Peng1 aHaves, Philip uhttps://simulationresearch.lbl.gov/publications/field-testing-component-level-model01395nas a2200133 4500008004100000050001500041245011000056210006900166260003900235520086600274100001301140700001801153856009001171 2002 eng d aLBNL-5067800aField Testing of Component-Level Model-Based Fault Detection Methods for Mixing Boxes and VAV Fan Systems0 aField Testing of ComponentLevel ModelBased Fault Detection Metho aPacific Grove, Californiac05/20023 a

An automated fault detection and diagnosis tool for HVAC systems is being developed, based on an integrated, life-cycle, approach to commissioning and performance monitoring. The tool uses component-level HVAC equipment models implemented in the SPARK equation-based simulation environment. The models are configured using design information and component manufacturers' data and then fine-tuned to match the actual performance of the equipment by using data measured during functional tests of the sort using in commissioning. This paper presents the results of field tests of mixing box and VAV fan system models in an experimental facility and a commercial office building. The models were found to be capable of representing the performance of correctly operating mixing box and VAV fan systems and detecting several types of incorrect operation.

1 aXu, Peng1 aHaves, Philip uhttps://simulationresearch.lbl.gov/publications/field-testing-component-level-model-001937nas a2200169 4500008004100000024001500041245006700056210006700123260002900190520137000219100002301589700002001612700001801632700001701650700001301667856008701680 2002 eng d aLBNL-5136500aHVAC Component Data Modeling Using Industry Foundation Classes0 aHVAC Component Data Modeling Using Industry Foundation Classes aLiège, Belgiumc12/20023 a

The Industry Foundation Classes (IFC) object data model of buildings is being developed by the International Alliance for Interoperability (IAI). The aim is to support data sharing and exchange in the building and construction industry across the life-cycle of a building.

This paper describes a number of aspects of a major extension of the HVAC part of the IFC data model. First is the introduction of a more generic approach for handling HVAC components. This includes type information, which corresponds to catalog data, occurrence information, which defines item-specific attributes such as location and connectivity, and performance history information, which documents the actual performance of the component instance over time. Other IFC model enhancements include an extension of the connectivity model used to specify how components forming a system can be traversed and the introduction of time-based data streams.

This paper includes examples of models of particular types of HVAC components, such as boilers and actuators, with all attributes included in the definitions. The paper concludes by describing the on-going process of model testing, implementation and integration into the complete IFC model and how the model can be used by software developers to support interoperability between HVAC-oriented design and analysis tools.

1 aBazjanac, Vladimir1 aForester, James1 aHaves, Philip1 aSucic, Darko1 aXu, Peng uhttps://simulationresearch.lbl.gov/publications/hvac-component-data-modeling-using