02543nas a2200277 4500008004100000022001300041245018600054210006900240260001200309300001400321490000800335520142800343653002701771653002701798653001801825653003601843100001901879700002001898700002201918700002101940700002401961700001301985700001501998700001902013856023302032 2018 eng d a0306261900aTranslating climate change and heating system electrification impacts on building energy use to future greenhouse gas emissions and electric grid capacity requirements in California0 aTranslating climate change and heating system electrification im c09/2018 a522 - 5340 v2253 a

Climate change and increased electrification of space and water heating in buildings can significantly affect future electricity demand and hourly demand profiles, which has implications for electric grid greenhouse gas emissions and capacity requirements. We use EnergyPlus to quantify building energy demand under historical and under several climate change projections of 32 kinds of building prototypes in 16 different climate zones of California and imposed these impacts on a year 2050 electric grid configuration by simulation in the Holistic Grid Resource Integration and Deployment (HIGRID) model. We find that climate change only prompted modest increases in grid resource capacity and negligible difference in greenhouse gas emissions since the additional electric load generally occurred during times with available renewable generation. Heating electrification, however, prompted a 30–40% reduction in greenhouse gas emissions but required significant grid resource capacity increases, due to the higher magnitude of load increases and lack of readily available renewable generation during the times when electrified heating loads occurred. Overall, this study translates climate change and electrification impacts to system-wide endpoint impacts on future electric grid configurations and highlights the complexities associated with translating building-level impacts to electric system-wide impacts.

10aBuilding Energy Demand10aClimate Change Impacts10aelectric grid10aHeating Electrification Effects1 aTarroja, Brian1 aChiang, Felicia1 aAghaKouchak, Amir1 aSamuelsen, Scott1 aRaghavan, Shuba, V.1 aWei, Max1 aSun, Kaiyu1 aHong, Tianzhen uhttps://linkinghub.elsevier.com/retrieve/pii/S0306261918306962https://api.elsevier.com/content/article/PII:S0306261918306962?httpAccept=text/xmlhttps://api.elsevier.com/content/article/PII:S0306261918306962?httpAccept=text/plain02289nas a2200217 4500008004100000245009600041210006900137490000800206520155700214100002601771700001801797700002701815700002201842700001801864700002301882700001701905700002901922700002001951700001801971856008201989 2017 eng d00aDynamic equation-based thermo-hydraulic pipe model for district heating and cooling systems0 aDynamic equationbased thermohydraulic pipe model for district he0 v1513 a

Simulation and optimisation of district heating and cooling networks requires efficient and realistic models of the individual network elements in order to correctly represent heat losses or gains, temperature propagation and pressure drops. Due to more recent thermal networks incorporating meshing decentralised heat and cold sources, the system often has to deal with variable temperatures and mass flow rates, with flow reversal occurring more frequently. This paper presents the mathematical derivation and software implementation in Modelica of a thermo-hydraulic model for thermal networks that meets the above requirements and compares it to both experimental data and a commonly used model. Good correspondence between experimental data from a controlled test set-up and simulations using the presented model was found. Compared to measurement data from a real district heating network, the simulation results led to a larger error than in the controlled test set-up, but the general trend is still approximated closely and the model yields results similar to a pipe model from the Modelica Standard Library. However, the presented model simulates 1.7 (for low number of volumes) to 68 (for highly discretized pipes) times faster than a conventional model for a realistic test case. A working implementation of the presented model is made openly available within the IBPSA Modelica Library. The model is robust in the sense that grid size and time step do not need to be adapted to the flow rate, as is the case in finite volume models.

1 avan der Heijde, Brahm1 aFuchs, Marcus1 aTugores, Carles, Ribas1 aSchweiger, Gerald1 aSartor, Kevin1 aBasciotti, Daniele1 aMuller, Dirk1 aNytsch-Geusen, Christoph1 aWetter, Michael1 aHelsen, Lieve uhttps://simulationresearch.lbl.gov/publications/dynamic-equation-based-thermo03410nas a2200409 4500008004100000245008500041210006900126260001200195520213600207653000902343653002502352653002202377653002002399653001902419653002302438653003302461653003902494653003202533653001302565653002102578100002202599700001902621700002202640700002102662700002002683700001702703700002302720700002202743700002102765700002002786700002302806700001902829700001502848700002802863700002002891856008902911 2017 eng d00aSmall and Medium Building Efficiency Toolkit and Community Demonstration Program0 aSmall and Medium Building Efficiency Toolkit and Community Demon c03/20173 a

Small commercial buildings in the United States consume 47 percent of all primary energy consumed in the building sector. Retrofitting small and medium commercial buildings may pose a steep challenge for owners, as many lack the expertise and resources to identify and evaluate cost-effective energy retrofit strategies. To address this problem, this project developed the Commercial Building Energy Saver (CBES), an energy retrofit analysis toolkit that calculates the energy use of a building, identifies and evaluates retrofit measures based on energy savings, energy cost savings, and payback. The CBES Toolkit includes a web app for end users and the CBES Application Programming Interface for integrating CBES with other energy software tools. The toolkit provides a rich feature set, including the following:

  1. Energy Benchmarking providing an Energy Star score
  2. Load Shape Analysis to identify potential building operation improvements
  3. Preliminary Retrofit Analysis which uses a custom developed pre-simulated database
  4. Detailed Retrofit Analysis which utilizes real time EnergyPlus simulations

In a parallel effort the project team developed technologies to measure outdoor airflow rate; commercialization and use would avoid both excess energy use from over ventilation and poor indoor air quality resulting from under ventilation.

If CBES is adopted by California’s statewide small office and retail buildings, by 2030 the state can anticipate 1,587 gigawatt hours of electricity savings, 356 megawatts of non-coincident peak demand savings, 30.2 megatherms of natural gas savings, $227 million of energy-related cost savings, and reduction of emissions by 757,866 metric tons of carbon dioxide equivalent. In addition, consultant costs will be reduced in the retrofit analysis process.

CBES contributes to the energy savings retrofit field by enabling a straightforward and uncomplicated decision-making process for small and medium business owners and leveraging different levels of assessment to match user background, preference, and data availability.

10aCBES10acommercial buildings10aenergy efficiency10aenergy modeling10aenergy savings10aindoor air quality10aindoor environmental quality10aoutdoor air measurement technology10aoutdoor airflow intake rate10aretrofit10aventilation rate1 aPiette, Mary, Ann1 aHong, Tianzhen1 aFisk, William, J.1 aBourassa, Norman1 aChan, Wanyu, R.1 aChen, Yixing1 aCheung, H.Y., Iris1 aHotchi, Toshifumi1 aKloss, Margarita1 aLee, Sang, Hoon1 aPrice, Phillip, N.1 aSchetrit, Oren1 aSun, Kaiyu1 aTaylor-Lange, Sarah, C.1 aZhang, Rongpeng uhttps://simulationresearch.lbl.gov/publications/small-and-medium-building-efficiency02293nas a2200241 4500008004100000245016600041210006900207520145100276653002201727653001801749653002101767653002301788653002501811653002201836653001501858100001401873700001201887700001701899700001901916700001401935700001501949856008701964 2017 eng d00aSpatial Distribution of Internal Heat Gains: A Probabilistic Representation and Evaluation of Its Influence on Cooling Equipment Sizing in Large Office Buildings0 aSpatial Distribution of Internal Heat Gains A Probabilistic Repr3 a

Internal heat gains from occupants, lighting, and plug loads are significant components of the space cooling load in an office building. Internal heat gains vary with time and space. The spatial diversity is significant, even for spaces with the same function in the same building. The stochastic nature of internal heat gains makes determining the peak cooling load to size air-conditioning systems a challenge. The traditional conservative practice of considering the largest internal heat gain among spaces and applying safety factors overestimates the space cooling load, which leads to oversized air-conditioning equipment and chiller plants. In this study, a field investigation of several large office buildings in China led to the development of a new probabilistic approach that represents the spatial diversity of the design internal heat gain of each tenant as a probability distribution function. In a large office building, a central chiller plant serves all air handling units (AHUs), with each AHU serving one or more floors of the building. Therefore, the spatial diversity should be considered differently when the peak cooling loads to size the AHUs and chillers are calculated. The proposed approach considers two different levels of internal heat gains to calculate the peak cooling loads and size the AHUs and chillers in order to avoid oversizing, improve the overall operating efficiency, and thus reduce energy use.

10aair handling unit10achiller plant10aequipment sizing10ainternal heat gain10aspatial distribution10aspatial diversity10astochastic1 aZhang, Qi1 aYan, Da1 aAn, Jingjing1 aHong, Tianzhen1 aTian, Wei1 aSun, Kaiyu uhttps://simulationresearch.lbl.gov/publications/spatial-distribution-internal-heat01628nas a2200241 4500008003900000245009100039210006900130260001200199300001200211490000800223520083600231653002201067653003401089653003601123653001501159653002201174100001901196700002801215700001801243700001201261700002601273856008701299 2016 d00aAdvances in research and applications of energy-related occupant behavior in buildings0 aAdvances in research and applications of energyrelated occupant  c03/2016 a694-7020 v1163 a

Occupant behavior is one of the major factors influencing building energy consumption and contributing to uncertainty in building energy use prediction and simulation. Currently the understanding of occupant behavior is insufficient both in building design, operation and retrofit, leading to incorrect simplifications in modeling and analysis. This paper introduced the most recent advances and current obstacles in modeling occupant behavior and quantifying its impact on building energy use. The major themes include advancements in data collection techniques, analytical and modeling methods, and simulation applications which provide insights into behavior energy savings potential and impact. There has been growing research and applications in this field, but significant challenges and opportunities still lie ahead.

10aBehavior Modeling10aBuilding design and operation10abuilding performance simulation10aenergy use10aoccupant behavior1 aHong, Tianzhen1 aTaylor-Lange, Sarah, C.1 aD'Oca, Simona1 aYan, Da1 aCorgnati, Stefano, P. uhttps://simulationresearch.lbl.gov/publications/advances-research-and-applications02261nas a2200241 4500008003900000245011100039210006900150260001200219520144900231653002401680653003201704653002001736653001501756653003101771653001301802100002001815700001901835700002201854700001701876700001701893700002801910856008101938 2015 d00aAccelerating the energy retrofit of commercial buildings using a database of energy efficiency performance0 aAccelerating the energy retrofit of commercial buildings using a c07/20153 a

Small and medium-sized commercial buildings can be retrofitted to significantly reduce their energy use, however it is a huge challenge as owners usually lack of the expertise and resources to conduct detailed on-site energy audit to identify and evaluate cost-effective energy technologies. This study presents a DEEP (database of energy efficiency performance) that provides a direct resource for quick retrofit analysis of commercial buildings. DEEP, compiled from the results of about ten million EnergyPlus simulations, enables an easy screening of ECMs (energy conservation measures) and retrofit analysis. The simulations utilize prototype models representative of small and mid-size offices and retails in California climates. In the formulation of DEEP, large scale EnergyPlus simulations were conducted on high performance computing clusters to evaluate hundreds of individual and packaged ECMs covering envelope, lighting, heating, ventilation, air-conditioning, plug-loads, and service hot water. The architecture and simulation environment to create DEEP is flexible and can expand to cover additional building types, additional climates, and new ECMs. In this study DEEP is integrated into a web-based retrofit toolkit, the Commercial Building Energy Saver, which provides a platform for energy retrofit decision making by querying DEEP and unearthing recommended ECMs, their estimated energy savings and financial payback.

10abuilding simulation10aEnergy conservation measure10aenergy modeling10aenergyplus10aHigh Performance computing10aretrofit1 aLee, Sang, Hoon1 aHong, Tianzhen1 aPiette, Mary, Ann1 aSawaya, Geof1 aChen, Yixing1 aTaylor-Lange, Sarah, C. uhttps://simulationresearch.lbl.gov/publications/accelerating-energy-retrofit02732nas a2200265 4500008003900000245013300039210006900172260001200241300001200253490000600265520189500271653001302166653001002179653002202189653001202211653001202223100002102235700001802256700001902274700002102293700002902314700001802343700001502361856009002376 2015 d00aAssessment of the Potential to Achieve Very Low Energy Use in Public Buildings in China with Advanced Window and Shading Systems0 aAssessment of the Potential to Achieve Very Low Energy Use in Pu c05/2015 a668-6990 v53 a

As rapid growth in the construction industry continues to occur in China, the increased demand for a higher standard living is driving significant growth in energy use and demand across the country. Building codes and standards have been implemented to head off this trend, tightening prescriptive requirements for fenestration component measures using methods similar to the US model energy code American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. The objective of this study is to (a) provide an overview of applicable code requirements and current efforts within China to enable characterization and comparison of window and shading products, and (b) quantify the load reduction and energy savings potential of several key advanced window and shading systems, given the divergent views on how space conditioning requirements will be met in the future.

System-level heating and cooling loads and energy use performance were evaluated for a code-compliant large office building using the EnergyPlus building energy simulation program. Commercially-available, highly-insulating, low-emittance windows were found to produce 24-66% lower perimeter zone HVAC electricity use compared to the mandated energy-efficiency standard in force (GB 50189-2005) in cold climates like Beijing. Low-e windows with operable exterior shading produced up to 30-80% reductions in perimeter zone HVAC electricity use in Beijing and 18-38% reductions in Shanghai compared to the standard. The economic context of China is unique since the cost of labor and materials for the building industry is so low. Broad deployment of these commercially available technologies with the proper supporting infrastructure for design, specification, and verification in the field would enable significant reductions in energy use and greenhouse gas emissions in the near term.

10abuilding10aChina10aenergy efficiency10ashading10awindows1 aLee, Eleanor, S.1 aPang, Xiufeng1 aMcNeil, Andrew1 aHoffmann, Sabine1 aThanachareonkit, Anothai1 aLi, Zhengrong1 aDing, Yong uhttps://simulationresearch.lbl.gov/publications/assessment-potential-achieve-very-low02814nas a2200349 4500008003900000245007400039210006900113260001100182490000800193520171300201653003701914653005101951653001402002653003202016653003202048653002602080653002202106653001502128653001502143653001302158653002002171653002402191100001902215700002202234700001702256700002002273700002802293700002002321700001502341700002302356856008502379 2015 d00aCommercial Building Energy Saver: An energy retrofit analysis toolkit0 aCommercial Building Energy Saver An energy retrofit analysis too c9/20150 v1593 a

Small commercial buildings in the United States consume 47% of the total primary energy of the buildings sector. Retrofitting small and medium commercial buildings poses a huge challenge for owners because they usually lack the expertise and resources to identify and evaluate cost-effective energy retrofit strategies. This paper presents the Commercial Building Energy Saver (CBES), an energy retrofit analysis toolkit, which calculates the energy use of a building, identifies and evaluates retrofit measures in terms of energy savings, energy cost savings and payback. The CBES Toolkit includes a web app (APP) for end users and the CBES Application Programming Interface (API) for integrating CBES with other energy software tools. The toolkit provides a rich set of features including: (1) Energy Benchmarking providing an Energy Star score, (2) Load Shape Analysis to identify potential building operation improvements, (3) Preliminary Retrofit Analysis which uses a custom developed pre-simulated database and, (4) Detailed Retrofit Analysis which utilizes real-time EnergyPlus simulations. CBES includes 100 configurable energy conservation measures (ECMs) that encompass IAQ, technical performance and cost data, for assessing 7 different prototype buildings in 16 climate zones in California and 6 vintages. A case study of a small office building demonstrates the use of the toolkit for retrofit analysis. The development of CBES provides a new contribution to the field by providing a straightforward and uncomplicated decision making process for small and medium business owners, leveraging different levels of assessment dependent upon user background, preference and data availability.

10aBuilding Technologies Department10aBuilding Technology and Urban Systems Division10abuildings10abuildings energy efficiency10aCommercial Building Systems10aconservation measures10aenergy efficiency10aenergy use10aenergyplus10aExternal10aRetrofit Energy10asimulation research1 aHong, Tianzhen1 aPiette, Mary, Ann1 aChen, Yixing1 aLee, Sang, Hoon1 aTaylor-Lange, Sarah, C.1 aZhang, Rongpeng1 aSun, Kaiyu1 aPrice, Phillip, N. uhttps://simulationresearch.lbl.gov/publications/commercial-building-energy-saver02128nas a2200241 4500008003900000245007200039210006900111260002700180300001400207490000700221520132000228653003001548653003301578653002301611653002201634653002901656653002701685100002001712700001901732700002201751700002801773856008501801 2015 d00aEnergy retrofit analysis toolkit for commercial buildings: A review0 aEnergy retrofit analysis toolkit for commercial buildings A revi bElsevier Ltd.c09/2015 a1087-11000 v893 a

Retrofit analysis toolkits can be used to optimize energy or cost savings from retrofit strategies, accelerating the adoption of ECMs (energy conservation measures) in buildings. This paper provides an up-todate review of the features and capabilities of 18 energy retrofit toolkits, including ECMs and the calculation engines. The fidelity of the calculation techniques, a driving component of retrofit toolkits, were evaluated. An evaluation of the issues that hinder effective retrofit analysis in terms of accessibility, usability, data requirement, and the application of efficiency measures, provides valuable insights into advancing the field forward. Following this review the general concepts were determined: (1) toolkits developed primarily in the private sector use empirically data-driven methods or benchmarking to provide ease of use, (2) almost all of the toolkits which used EnergyPlus or DOE-2 were freely accessible, but suffered from complexity, longer data input and simulation run time, (3) in general, there appeared to be a fine line between having too much detail resulting in a long analysis time or too little detail which sacrificed modeling fidelity. These insights provide an opportunity to enhance the design and development of existing and new retrofit toolkits in the future.

10aBuilding energy retrofit10aEnergy conservation measures10aEnergy efficiency10aEnergy simulation10aRetrofit analysis tools10aWeb-based applications1 aLee, Sang, Hoon1 aHong, Tianzhen1 aPiette, Mary, Ann1 aTaylor-Lange, Sarah, C. uhttps://simulationresearch.lbl.gov/publications/energy-retrofit-analysis-toolkit01728nas a2200265 4500008003900000245010500039210006900144260001200213300001200225490000800237520089300245653002401138653002201162653002001184653001501204653002201219100001201241700002101253700001901274700001901293700001701312700002301329700002201352856008801374 2015 d00aOccupant Behavior Modeling for Building Performance Simulation: Current State and Future Challenges0 aOccupant Behavior Modeling for Building Performance Simulation C c11/2015 a264-2780 v1073 a

Occupant behavior is now widely recognized as a major contributing factor to uncertainty of building performance. While a surge of research on the topic has occurred over the past four decades, and particularly the past few years, there are many gaps in knowledge and limitations to current methodologies. This paper outlines the state-of-the-art research, current obstacles and future needs and directions for the following four-step iterative process: (1) occupant monitoring and data collection, (2) model development, (3) model evaluation, and (4) model implementation into building simulation tools. Major themes include the need for greater rigor in experimental methodologies; detailed, honest, and candid reporting of methods and results; and development of an efficient means to implement occupant behavior models and integrate them into building energy modeling programs.

10abuilding simulation10aenergy efficiency10aenergy modeling10aenergy use10aoccupant behavior1 aYan, Da1 aO'Brien, William1 aHong, Tianzhen1 aFeng, Xiaohang1 aGunay, Burak1 aTahmasebi, Farhang1 aMahdavi, Ardeshir uhttps://simulationresearch.lbl.gov/publications/occupant-behavior-modeling-building02313nas a2200265 4500008003900000245014200039210006900181260001200250300001200262490000700274520142200281653003201703653002401735653002001759653001001779653002201789653001501811100001901826700001801845700002801863700002701891700001701918700002601935856008601961 2015 d00aAn Ontology to Represent Energy-Related Occupant Behavior in Buildings. Part II: Implementation of the DNAS framework using an XML schema0 aOntology to Represent EnergyRelated Occupant Behavior in Buildin c08/2015 a196-2050 v943 a

Energy-related occupant behavior in buildings is difficult to define and quantify, yet critical to our understanding of total building energy consumption. Part I of this two-part paper introduced the DNAS (Drivers, Needs, Actions and Systems) framework, to standardize the description of energy-related occupant behavior in buildings. Part II of this paper implements the DNAS framework into an XML (eXtensible Markup Language) schema, titled ‘occupant behavior XML’ (obXML). The obXML schema is used for the practical implementation of the DNAS framework into building simulation tools. The topology of the DNAS framework implemented in the obXML schema has a main root element OccupantBehavior, linking three main elements representing Buildings, Occupants and Behaviors. Using the schema structure, the actions of turning on an air conditioner and closing blinds provide two examples of how the schema standardizes these actions using XML. The obXML schema has inherent flexibility to represent numerous, diverse and complex types of occupant behaviors in buildings, and it can also be expanded to encompass new types of behaviors. The implementation of the DNAS framework into the obXML schema will facilitate the development of occupant information modeling (OIM) by providing interoperability between occupant behavior models and building energy modeling programs.

10abuilding energy consumption10abuilding simulation10aenergy modeling10aobXML10aoccupant behavior10aXML schema1 aHong, Tianzhen1 aD'Oca, Simona1 aTaylor-Lange, Sarah, C.1 aTurner, William, J. N.1 aChen, Yixing1 aCorgnati, Stefano, P. uhttps://simulationresearch.lbl.gov/publications/ontology-represent-energy-related02575nas a2200241 4500008003900000245011800039210006900157260001200226300001200238490000700250520177500257653002002032653003802052653001302090653002202103653001302125653001502138100001902153700001802172700002702190700002802217856008802245 2015 d00aAn Ontology to Represent Energy-related Occupant Behavior in Buildings Part I: Introduction to the DNAs Framework0 aOntology to Represent Energyrelated Occupant Behavior in Buildin c10/2015 a764-7770 v923 a

Reducing energy consumption in the buildings sector requires significant changes, but technology alone may fail to guarantee efficient energy performance. Human behavior plays a pivotal role in building design, operation, management and retrofit, and is a crucial positive factor for improving the indoor environment, while reducing energy use at low cost. Over the past 40 years, a substantial body of literature has explored the impacts of human behavior on building technologies and operation. Often, need-action-event cognitive theoretical frameworks were used to represent human-machine interactions. In Part I of this paper a review of more than 130 published behavioral studies and frameworks was conducted. A large variety of data-driven behavioral models have been developed based on field monitoring of the human-building-system interaction. Studies have emerged scattered geographically around the world that lack in standardization and consistency, thus leading to difficulties when comparing one with another. To address this problem, an ontology to represent energy-related occupant behavior in buildings is presented. Accordingly, the technical DNAs framework is developed based on four key components: i) the Drivers of behavior, ii) the Needs of the occupants, iii) the Actions carried out by the occupants, and iv) the building systems acted upon by the occupants. This DNAs framework is envisioned to support the international research community to standardize a systematic representation of energy-related occupant behavior in buildings. Part II of this paper further develops the DNAs framework as an XML (eXtensible Markup Language) schema, obXML, for exchange of occupant information modeling and integration with building simulation tools.

10aBuilding energy10ahuman-building-system interaction10amodeling10aoccupant behavior10aontology10asimulation1 aHong, Tianzhen1 aD'Oca, Simona1 aTurner, William, J. N.1 aTaylor-Lange, Sarah, C. uhttps://simulationresearch.lbl.gov/publications/ontology-represent-energy-related-002242nas a2200133 4500008003900000245007600039210006900115520175500184100001501939700001901954700002801973700002202001856008502023 2015 d00aA pattern-based automated approach to building energy model calibration0 apatternbased automated approach to building energy model calibra3 a

Building model calibration is critical in bringing simulated energy use closer to the actual consumption. This paper presents a novel, automated model calibration approach that uses logic linking parameter tuning with bias pattern recognition to overcome some of the disadvantages associated with traditional calibration processes. The pattern-based process contains four key steps: (1) running the original precalibrated energy model to obtain monthly simulated electricity and gas use; (2) establishing a pattern bias, either Universal or Seasonal Bias, by comparing load shape patterns of simulated and actual monthly energy use; (3) using programmed logic to select which parameter to tune first based on bias pattern, weather and input parameter interactions; and (4) automatically tuning the calibration parameters and checking the progress using pattern-fit criteria. The automated calibration algorithm was implemented in the Commercial Building Energy Saver, a web-based building energy retrofit analysis toolkit. The proof of success of the methodology was demonstrated using a case study of an office building located in San Francisco. The case study inputs included the monthly electricity bill, monthly gas bill, original building model and weather data with outputs resulting in a calibrated model that more closely matched that of the actual building energy use profile. The novelty of the developed calibration methodology lies in linking parameter tuning with the underlying logic associated with bias pattern identification. Although there are some limitations to this approach, the pattern-based automated calibration methodology can be universally adopted as an alternative to manual or hierarchical calibration approaches.

1 aSun, Kaiyu1 aHong, Tianzhen1 aTaylor-Lange, Sarah, C.1 aPiette, Mary, Ann uhttps://simulationresearch.lbl.gov/publications/pattern-based-automated-approach02814nas a2200169 4500008003900000245008800039210006900127520221500196653002402411653002202435653001402457653002202471653001502493100002702508700001902535856009002554 2014 d00aA Technical Framework to Describe Occupant Behavior for Building Energy Simulations0 aTechnical Framework to Describe Occupant Behavior for Building E3 a

Green buildings that fail to meet expected design performance criteria indicate that technology alone does not guarantee high performance. Human influences are quite often simplified and ignored in the design, construction, and operation of buildings. Energy-conscious human behavior has been demonstrated to be a significant positive factor for improving the indoor environment while reducing the energy use of buildings. In our study we developed a new technical framework to describe energy-related human behavior in buildings. The energy-related behavior includes accounting for individuals and groups of occupants and their interactions with building energy services systems, appliances and facilities. The technical framework consists of four key components:

  1. the drivers behind energy-related occupant behavior, which are biological, societal, environmental, physical, and economical in nature
  2. the needs of the occupants are based on satisfying criteria that are either physical (e.g. thermal, visual and acoustic comfort) or non-physical (e.g. entertainment, privacy, and social reward)
  3. the actions that building occupants perform when their needs are not fulfilled
  4. the systems with which an occupant can interact to satisfy their needs

The technical framework aims to provide a standardized description of a complete set of human energy-related behaviors in the form of an XML schema. For each type of behavior (e.g., occupants opening/closing windows, switching on/off lights etc.) we identify a set of common behaviors based on a literature review, survey data, and our own field study and analysis. Stochastic models are adopted or developed for each type of behavior to enable the evaluation of the impact of human behavior on energy use in buildings, during either the design or operation phase. We will also demonstrate the use of the technical framework in assessing the impact of occupancy behavior on energy saving technologies. The technical framework presented is part of our human behavior research, a 5-year program under the U.S. - China Clean Energy Research Center for Building Energy Efficiency.

10abuilding simulation10aenergy efficiency10aframework10aoccupant behavior10aXML schema1 aTurner, William, J. N.1 aHong, Tianzhen uhttps://simulationresearch.lbl.gov/publications/technical-framework-describe-occupant00472nas a2200109 4500008003900000245011000039210006900149100001900218700002700237700001400264856008400278 2013 d00aThe Two-Day CERC-BEE Forum on Building Integrated Design and Occupant Behavior: Presentations and Summary0 aTwoDay CERCBEE Forum on Building Integrated Design and Occupant 1 aHong, Tianzhen1 aTurner, William, J. N.1 aLi, Cheng uhttps://simulationresearch.lbl.gov/publications/two-day-cerc-bee-forum-building00559nas a2200157 4500008004100000245009200041210006900133260001200202300001400214490000700228100002100235700001800256700001800274700002100292856008800313 2011 eng d00aMulti-Criteria Optimisation using Past, Real Time and Predictive Performance Benchmarks0 aMultiCriteria Optimisation using Past Real Time and Predictive P c04/2011 a1258-12650 v191 aTorrens, Ignacio1 aKeane, Marcus1 aCosta, Andrea1 aO'Donnell, James uhttps://simulationresearch.lbl.gov/publications/multi-criteria-optimisation-using-001832nas a2200157 4500008004100000245015100041210006900192260001200261300001200273490000700285520123900292100001801531700001601549700002001565856008901585 2010 eng d00aCo-simulation for performance prediction of integrated building and HVAC systems - An analysis of solution characteristics using a two-body system0 aCosimulation for performance prediction of integrated building a c08/2010 a957-9700 v183 a

Integrated performance simulation of buildings and heating, ventilation and air-conditioning (HVAC) systems can help in reducing energy consumption and increasing occupant comfort. However, no single building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to analyze integrated building systems and to enable rapid prototyping of innovative building and system technologies. One way to alleviate this problem is to use co-simulation to integrate different BPS tools. Co-simulation approach represents a particular case of simulation scenario where at least two simulators solve coupled differential-algebraic systems of equations and exchange data that couples these equations during the time integration.

This article analyzes how co-simulation influences consistency, stability and accuracy of the numerical approximation to the solution. Consistency and zero-stability are studied for a general class of the problem, while a detailed consistency and absolute stability analysis is given for a simple two-body problem. Since the accuracy of the numerical approximation to the solution is reduced in co-simulation, the article concludes by discussing ways for how to improve accuracy.

1 aTrcka, Marija1 aHensen, Jan1 aWetter, Michael uhttps://simulationresearch.lbl.gov/publications/co-simulation-performance-prediction01687nas a2200193 4500008004100000245006900041210006800110300001200178490000600190520103000196653003601226653001801262653002001280653005601300100001801356700001601374700002001390856008301410 2009 eng d00aCo-simulation of innovative integrated HVAC systems in buildings0 aCosimulation of innovative integrated HVAC systems in buildings a209-2300 v23 a

Integrated performance simulation of buildings HVAC systems can help in reducing energy consumption and increasing occupant comfort. However, no single building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to analyze integrated building systems and to enable rapid prototyping of innovative building and system technologies. One way to alleviate this problem is to use co-simulation, as an integrated approach to simulation. This article elaborates on issues important for co-simulation realization and discusses multiple possibilities to justify the particular approach implemented in the here described co-simulation prototype. The prototype is validated with the results obtained from the traditional simulation approach. It is further used in a proof-of-concept case study to demonstrate the applicability of the method and to highlight its benefits. Stability and accuracy of different coupling strategies are analyzed to give a guideline for the required coupling time step.

10abuilding performance simulation10aco-simulation10ahvac simulation10ainnovative building system modelling and simulation1 aTrcka, Marija1 aHensen, Jan1 aWetter, Michael uhttp://www.informaworld.com/smpp/section?content=a913244253&fulltext=71324092801911nas a2200145 4500008004100000245011700041210006900158260003100227300001200258520137900270100001801649700002001667700001601687856006201703 2009 eng d00aAn implementation of co-simulation for performance prediction of innovative integrated HVAC systems in buildings0 aimplementation of cosimulation for performance prediction of inn aGlasgow, Scotlandc07/2009 a724-7313 aIntegrated performance simulation of buildings and heating, ventilation and air-conditioning (HVAC)systems can help reducing energy consumption and increasing level of occupant comfort. However, no singe building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to accommodate the ever-increasing complexity and rapid innovations in building and system technologies. One way to alleviate this problem is to use co-simulation. The co-simulation approach represents a particular case of simulation scenario where at least two simulators solve coupled differential-algebraic systems of equations and exchange data that couples these equations during the time integration. This paper elaborates on issues important for co-simulation realization and discusses multiple possibilities to justify the particular approach implemented in a co-simulation prototype. The prototype is verified and validated against the results obtained from the traditional simulation approach. It is further used in a case study for the proof-of-concept, to demonstrate the applicability of the method and to highlight its benefits. Stability and accuracy of different coupling strategies are analyzed to give a guideline for the required coupling frequency. The paper concludes by defining requirements and recommendations for generic co-simulation implementations.1 aTrcka, Marija1 aWetter, Michael1 aHensen, Jan uhttp://www.ibpsa.org/proceedings/BS2009/BS09_0724_731.pdf00500nas a2200121 4500008004100000245010400041210006900145100002100214700001800235700002100253700001800274856008600292 2009 eng d00aMulti-criteria optimisation using past, historical, real time and predictive performance benchmarks0 aMulticriteria optimisation using past historical real time and p1 aTorrens, Ignacio1 aKeane, Marcus1 aO'Donnell, James1 aCosta, Andrea uhttps://simulationresearch.lbl.gov/publications/multi-criteria-optimisation-using00487nas a2200121 4500008004100000245008500041210006900126260002800195100001800223700002000241700001600261856008800277 2007 eng d00aComparison of Co-Simulation Approaches for Building and HVAC/R System Simulation0 aComparison of CoSimulation Approaches for Building and HVACR Sys aBeijing, Chinac09/20071 aTrcka, Marija1 aWetter, Michael1 aHensen, Jan uhttps://simulationresearch.lbl.gov/publications/comparison-co-simulation-approaches01771nas a2200145 4500008004100000245008900041210006900130260002800199300001400227520127100241100001801512700002001530700001601550856005901566 2007 eng d00aComparison of co-simulation approaches for building and HVAC/R system simulation.
0 aComparison of cosimulation approaches for building and HVACR sys aBeijing, Chinac09/2007 a1418-14253 aAppraisal of modern performance-based energy codes, as well as heating, ventilation, air- conditioning and refrigeration (HVAC/R) system*design require use of an integrated building and system performance simulation program. However, the required scope of the modeling library of such integrated tools often goes beyond those offered in available simulation programs. One remedy for this situation would be to develop the required models in an existing simulation program. However, due to the lack of model interoperability, the model would not be available in other simulation programs. We suggest co-simulation for HVAC/R system simulation as an approach to alleviate the above issues. In co-simulation, each subsystem is modeled and simulated in the appropriate simulation program, potentially on different computers, and intermediate results are communicated over the network during execution time. We discuss different co-simulation approaches and give insights into specific prototypes. Based on the prototypes, we compare the approaches in terms of accuracy, stability and execution time, using a simple case study. We finish with results discussions and recommendations on how to perform co-simulation to maintain the required accuracy of simulation results.1 aTrcka, Marija1 aWetter, Michael1 aHensen, Jan uhttp://www.ibpsa.org/proceedings/BS2007/p503_final.pdf00465nas a2200121 4500008004100000245005800041210005800099260002800157100002100185700002500206700002300231856008900254 2007 eng d00aSimulation of Energy Management Systems in EnergyPlus0 aSimulation of Energy Management Systems in EnergyPlus aBeijing, Chinac09/20071 aEllis, Peter, G.1 aTorcellini, Paul, A.1 aCrawley, Drury, B. uhttps://simulationresearch.lbl.gov/publications/simulation-energy-management-systems00480nas a2200121 4500008004100000245008900041210006900130260001200199100002400211700002500235700001500260856008300275 2006 eng d00aAssessment of the Technical Potential for Achieving Zero-Energy Commercial Buildings0 aAssessment of the Technical Potential for Achieving ZeroEnergy C c08/20061 aGriffith, Brent, T.1 aTorcellini, Paul, A.1 aRyan, John uhttps://simulationresearch.lbl.gov/publications/assessment-technical-potential00514nas a2200133 4500008004100000245006500041210006500106260003200171100002100203700002400224700001900248700002500267856008800292 2006 eng d00aAutomated Multivariate Optimization Tool for Energy Analysis0 aAutomated Multivariate Optimization Tool for Energy Analysis aCambridge, MA, USAc08/20061 aEllis, Peter, G.1 aGriffith, Brent, T.1 aLong, Nicholas1 aTorcellini, Paul, A. uhttps://simulationresearch.lbl.gov/publications/automated-multivariate-optimization02020nas a2200265 4500008004100000245010800041210006900149260001200218300001400230490000700244520118600251653003801437653002501475653002401500100002601524700001301550700001601563700001301579700001201592700002401604700002201628700002001650700001301670856007101683 2006 eng d00aCharacterization of the Temperature Oscillation Technique to Measure the Thermal Conductivity of Fluids0 aCharacterization of the Temperature Oscillation Technique to Mea c08/2006 a2950-29560 v493 a

The temperature oscillation technique to measure the thermal diffusivity of a fluid consists of filling a cylindrical volume with the fluid, applying an oscillating temperature boundary condition at the two ends of the cylinder, measuring the amplitude and phase of the temperature oscillation at any point inside the cylinder, and finally calculating the fluid thermal diffusivity from the amplitude and phase values of the temperature oscillations at the ends and at the point inside the cylinder. Although this experimental technique was introduced by Santucci and co-workers nearly two decades ago, its application is still limited, perhaps because of the perceived difficulties in obtaining accurate results. Here, we attempt to clarify this approach by first estimating the maximum size of the liquid’s cylindrical volume, performing a systematic series of experiments to find the allowable amplitude and frequency of the imposed temperature oscillations, and then validating our experimental setup and the characterization method by measuring the thermal conductivity of pure water at different temperatures and comparing our results with previously published work.

10aTemperature oscillation technique10aThermal conductivity10athermal diffusivity1 aBhattacharya, Prajesh1 aNara, S.1 aVijayan, P.1 aTang, T.1 aLai, W.1 aPhelan, Patrick, E.1 aPrasher, Ravi, S.1 aSong, David, W.1 aWang, J. uhttp://www.sciencedirect.com/science/article/pii/S001793100600144X02020nas a2200265 4500008004100000245010800041210006900149260001200218300001400230490000700244520118600251653003801437653002501475653002401500100002601524700001301550700001601563700001301579700001201592700002401604700002201628700002001650700001301670856007101683 2006 eng d00aCharacterization of the Temperature Oscillation Technique to Measure the Thermal Conductivity of Fluids0 aCharacterization of the Temperature Oscillation Technique to Mea c08/2006 a2950-29560 v493 a

The temperature oscillation technique to measure the thermal diffusivity of a fluid consists of filling a cylindrical volume with the fluid, applying an oscillating temperature boundary condition at the two ends of the cylinder, measuring the amplitude and phase of the temperature oscillation at any point inside the cylinder, and finally calculating the fluid thermal diffusivity from the amplitude and phase values of the temperature oscillations at the ends and at the point inside the cylinder. Although this experimental technique was introduced by Santucci and co-workers nearly two decades ago, its application is still limited, perhaps because of the perceived difficulties in obtaining accurate results. Here, we attempt to clarify this approach by first estimating the maximum size of the liquid’s cylindrical volume, performing a systematic series of experiments to find the allowable amplitude and frequency of the imposed temperature oscillations, and then validating our experimental setup and the characterization method by measuring the thermal conductivity of pure water at different temperatures and comparing our results with previously published work.

10aTemperature oscillation technique10aThermal conductivity10athermal diffusivity1 aBhattacharya, Prajesh1 aNara, S.1 aVijayan, P.1 aTang, T.1 aLai, W.1 aPhelan, Patrick, E.1 aPrasher, Ravi, S.1 aSong, David, W.1 aWang, J. uhttp://www.sciencedirect.com/science/article/pii/S001793100600144X00480nas a2200133 4500008004100000245005400041210005400095260003600149100001700185700002000202700002000222700001900242856008500261 2006 eng d00aHalfway to Zero Energy in a Large Office Building0 aHalfway to Zero Energy in a Large Office Building aPacific Grove, CA, USAc08/20061 aHanson, Mark1 aCarlson, Steven1 aSammartano, Dan1 aTaylor, Thomas uhttps://simulationresearch.lbl.gov/publications/halfway-zero-energy-large-office00441nas a2200109 4500008004100000245007000041210006900111260003200180100001500212700002000227856008400247 2006 eng d00aRadiant Slab Cooling: A Case Study of Building Energy Performance0 aRadiant Slab Cooling A Case Study of Building Energy Performance aCambridge, MA, USAc08/20061 aTian, Zhen1 aLove, James, A. uhttps://simulationresearch.lbl.gov/publications/radiant-slab-cooling-case-study00454nas a2200121 4500008004100000245005700041210005700098260002900155100002100184700001900205700001800224856009000242 2006 eng d00aThermal Performance Simulation of an Atrium Building0 aThermal Performance Simulation of an Atrium Building aToronto, Canadac05/20061 aGöçer, Özgür1 aTavil, Aslihan1 aÖzkan, Ertan uhttps://simulationresearch.lbl.gov/publications/thermal-performance-simulation-atrium00504nas a2200133 4500008004100000245006100041210006000102260003600162100002500198700001800223700001800241700002300259856008800282 2006 eng d00aZero Energy Buildings: A Critical Look at the Definition0 aZero Energy Buildings A Critical Look at the Definition aPacific Grove, CA, USAc08/20061 aTorcellini, Paul, A.1 aPless, Shanti1 aDeru, Michael1 aCrawley, Drury, B. uhttps://simulationresearch.lbl.gov/publications/zero-energy-buildings-critical-look00405nas a2200109 4500008004100000245004700041210004700088260003000135100002100165700002500186856008400211 2005 eng d00aSimulating Tall Buildings Using EnergyPlus0 aSimulating Tall Buildings Using EnergyPlus aMontreal, Canadac08/20051 aEllis, Peter, G.1 aTorcellini, Paul, A. uhttps://simulationresearch.lbl.gov/publications/simulating-tall-buildings-using00745nas a2200181 4500008004100000245019400041210006900235260002500304100002600329700001600355700001300371700001300384700002400397700002200421700001300443700002000456856008700476 2004 eng d00aEvaluation of the Temperature Oscillation Technique to Calculate Thermal Conductivity of Water and Systematic Measurement of the Thermal Conductivity of Aluminum Oxide – Water Nanofluiids0 aEvaluation of the Temperature Oscillation Technique to Calculate aAnaheim, CAc11/20041 aBhattacharya, Prajesh1 aVijayan, P.1 aTang, T.1 aNara, S.1 aPhelan, Patrick, E.1 aPrasher, Ravi, S.1 aWang, J.1 aSong, David, W. uhttps://simulationresearch.lbl.gov/publications/evaluation-temperature-oscillation00424nas a2200109 4500008004100000245006200041210006200103260002900165100001800194700001700212856008500229 1988 eng d00aTowards an Environment for HVAC Control System Evaluation0 aTowards an Environment for HVAC Control System Evaluation aOstend, Belgiumc09/19881 aHaves, Philip1 aTrewella, D. uhttps://simulationresearch.lbl.gov/publications/towards-environment-hvac-control