@proceedings {298,
	title = {Non-Linear Recursive Parameter Estimation Applied to Fault Detection and Diagnosis in Real Buildings},
	journal = {System Simulation in Buildings {\textquoteright}02},
	year = {2002},
	month = {12/2002},
	address = {Li{\`e}ge, Belgium},
	author = {Richard A. Buswell and Philip Haves and Tim I. Salsbury and Jonathan A. Wright}
}
@proceedings {304,
	title = {Use of Whole Building Simulation in On-Line Performance Assessment: Modeling and Implementation Issues},
	journal = {Building Simulation {\textquoteright}01},
	year = {2001},
	month = {08/2001},
	address = {Rio de Janeiro},
	abstract = {<p>The application of model-based performance assessment at the whole building level is explored. The information requirements for a simulation to predict the actual performance of a particular real building, as opposed to estimating the impact of design options, are addressed with particular attention to common sources of input error and important deficiencies in most simulation models. The role of calibrated simulations is discussed. The communication requirements for passive monitoring and active testing are identified and the possibilities for using control system communications protocols to link on-line simulation and energy management and control systems are discussed. The potential of simulation programs to act as "plug-and-play" components on building control networks is discussed.</p>},
	author = {Philip Haves and Tim I. Salsbury and David Claridge and Mingsheng Liu}
}
@proceedings {323,
	title = {A Model-Based Approach to the Commissioning of HVAC Systems},
	journal = {CLIMA 2000},
	year = {1997},
	month = {08/1997},
	address = {Brussles, Belgium},
	author = {Richard A. Buswell and Philip Haves and Tim I. Salsbury}
}
@article {324,
	title = {Condition Monitoring in HVAC Subsystems using First Principles Models},
	journal = {ASHRAE Transactions},
	volume = {102},
	year = {1996},
	author = {Philip Haves and Tim I. Salsbury and Jonathan A. Wright}
}
@proceedings {325,
	title = {Development and Testing of a Prototype Tool for HVAC Control System Commissioning},
	journal = {ASHRAE Transactions},
	volume = {102},
	year = {1996},
	edition = {1},
	address = {Atlanta, GA},
	abstract = {<p>Describes a set of automated tests for use in commissioning the controls associated with coils and mixing boxes in air-handling units. The test procedures were developed using a computer simulation of an office building air conditioning system and were verified by manual testing in real buildings. A prototype automated commissioning system was then evaluated in blind tests on a large air conditioning test rig. Concludes that automated commissioning has the potential to reduce the cost and increase the thoroughness of HVAC controls commissioning. A prototype commissioning tool is under development based on the described approach.</p>},
	keywords = {air conditioning, automatic, commissioning, controls, prototypes, testing, year 1996},
	author = {Philip Haves and Jorgensen, D.R. and Tim I. Salsbury and Arthur L. Dexter}
}
@proceedings {327,
	title = {A Fault Detection and Diagnosis Method Based on First Principles Models and Expert Rules},
	journal = {Tsinghua HVAC-95},
	year = {1995},
	month = {09/1995},
	address = {Bejing, China},
	author = {Tim I. Salsbury and Philip Haves and Jonathan A. Wright}
}
@proceedings {331,
	title = {Model-Based Approaches to Fault Detection and Diagnosis in Air-Conditioning System},
	journal = {System Simulation in Buildings {\textquoteright}94},
	year = {1994},
	month = {12/1994},
	address = {Li{\`e}ge, Belgium},
	author = {Mourad Benouarets and Arthur L. Dexter and Richard S. Fargus and Philip Haves and Tim I. Salsbury and Jonathan A. Wright}
}
