Library with models for building energy and control systems


The Buildings library is a free library
for modeling building energy and control systems. 
Many models are based on models from the package
Modelica.Fluid and use
the same ports to ensure compatibility with the Modelica Standard

The figure below shows a section of the schematic view of the model Buildings.Examples.HydronicHeating. In the lower part of the figure, there is a dynamic model of a boiler, a pump and a stratified energy storage tank. Based on the temperatures of the storage tank, a finite state machine switches the boiler on and off. The heat distribution is done using a hydronic heating system with a three way valve and a pump with variable revolutions. The upper right hand corner shows a simplified room model that is connected to a radiator whose flow is controlled by a thermostatic valve.

The web page for this library is Contributions from different users to further advance this library are welcomed. Contributions may not only be in the form of model development, but also through model use, model testing, requirements definition or providing feedback regarding the model applicability to solve specific problems.

Package Content

Buildings.UsersGuide UsersGuide User's Guide
Buildings.Controls Controls Package with models for controls
Buildings.Fluid Fluid Package with models for fluid flow systems
Buildings.HeatTransfer HeatTransfer Package with heat transfer models
Buildings.Media Media Package with medium models
Buildings.Utilities Utilities Package with utility functions such as for I/O
Buildings.Examples Examples Collection of models that illustrate model use and test models
Buildings.BaseClasses BaseClasses Package with base classes for Buildings library

HTML-documentation generated by Dymola Thu Jun 24 16:53:59 2010.