Modelica.Electrical.MultiPhase

Information

This package contains packages for electrical multiphase components, based on Modelica.Electrical.Analog:

• Basic: basic components (resistor, capacitor, inductor, ...)
• Ideal: ideal elements (switches, diode, transformer, ...)
• Sensors: sensors to measure potentials, voltages, and currents
• Sources: time-dependent and controlled voltage and current sources

This package is intended to be used the same way as Modelica.Electrical.Analog but to make design of multiphase models easier.
The package is based on the plug: a composite connector containing m pins.
It is possible to connect plugs to plugs or single pins of a plug to single pins.
Potentials may be accessed as plug.pin[].v, currents may be accessed as plug.pin[].i.

Further development:

• temperature-dependent resistor
• lines (m-phase models)

Main Authors:

Anton Haumer
Technical Consulting & Electrical Engineering
A-3423 St.Andrae-Woerdern
Austria
email: a.haumer@haumer.at

Release Notes:

• v1.0 2004/10/01 Anton Haumer

Copyright:

Copyright © 1998-2013, Modelica Association and Anton Haumer.
The Modelica package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying disclaimer in the documentation of package Modelica in file "Modelica/package.mo".

Package Content

Name	Description
Examples	Multiphase test examples
Basic	Basic components for electrical multiphase models
Ideal	Multiphase components with idealized behaviour
Blocks	Blocks for multi phase systems
Functions	Functions for multi phase systems
Sensors	Multiphase potential, voltage and current Sensors
Sources	Multiphase voltage and current sources
Interfaces	Interfaces for electrical multiphase models